A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump and control module Hyundai Tucson 58910N7040 BE0600PBQ00
Vendors's code: 58910N7040
Product code: BE0600PBQ00
Barcode:
Code 39:
ISBN:
£138.75
Price
£138.75
£170.66
Price
£170.66
In stock
Ask about the product
ABS pump and control module Hyundai Tucson 58910N7040 BE0600PBQ00
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
£22.75
-
shipping
(Poland)
from
£22.75
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Does this ABS pump fit the Hyundai Tucson?
This is a used, working ABS pump with control module for the Hyundai Tucson - numbers 58910-N7040 / 58910N7040; BE0600PBQ00. Before buying, compare the numbers with the label on the module in your car.
ABS pump and control module Hyundai Tucson
A used ABS pump is a way to repair the braking system without buying a new, expensive part. This listing applies to: Hyundai Tucson; the unit is working and in good condition.
Numbers to compare
- 58910-N7040 / 58910N7040 - part number (OEM)
- BE0600PBQ00 - part number (OEM)
Application according to the listing
- Hyundai Tucson - model
How an ABS pump with control module works
One module contains two parts: the hydraulic block with valves and pump, and the electronics that control them. Both work together within fractions of a second, especially on slippery surfaces.
Matching
Compare number 58910-N7040 in full with the number on your pump. Different versions were fitted to the same models, so the number decides the fit, not the model alone. This listing covers the set described in the name, i.e. the ABS pump with control module. We will confirm the details of the set on request.
Symptoms of a faulty ABS pump
- the ABS warning light comes on once the car has warmed up,
- the brake pedal vibrates for no reason,
- no communication with the module over the CAN bus,
- the system switches to emergency mode.
Before you buy a pump, check the fuse, power supply, earth and wheel speed sensors - a damaged wiring loom or sensor can cause similar symptoms.
Questions and answers
| Is the part new? |
|---|
| The pump is used, but in working order. You will find its condition in the product features. |
| Where does this part come from? |
| The pump is used and comes from a dismantled vehicle. We give the manufacturer and OEM numbers in the description so that you can compare them. |
| Do the brakes need bleeding after replacement? |
| Yes, once the brake system has been opened it must be bled. In many cars this is done with a diagnostic tool that activates the ABS valves. |
Send a photo of your ABS pump or its number to contact@auto24parts.com and we will confirm whether this part will fit.
