A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump and control module Hyundai Tucson Kia 589202E000 BH60103400
Vendors's code: 589002E000
Product code: 5WY7507B
Barcode:
Code 39:
ISBN:
$145.56
Price
$145.56
$179.04
Price
$179.04
In stock
Ask about the product
ABS pump and control module Hyundai Tucson Kia 589202E000 BH60103400
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
$30.69
-
shipping
(Poland)
from
$30.69
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
ABS pump number 589202E000 - is this the right part?
This is a used, working ABS pump with control module for the Hyundai Tucson Kia - numbers 58920-2E000 / 589202E000; BH60103400. Before buying, compare the numbers with the label on the module in your car.
ABS pump and control module Hyundai Tucson Kia
An ABS pump with control module is the hydraulic unit of the brake system combined with a control module that analyses signals from the wheel sensors and controls the pressure in the brake circuits. This listing applies to: Hyundai Tucson Kia (2006-2010). The part is used, working and in good condition.
Numbers to compare
- 58920-2E000 / 589202E000 - part number (OEM)
- BH60103400 - part number (OEM)
- 5WY7507B - part number (OEM)
- 58900-2E000 / 589002E000 - part number (OEM)
Application according to the listing
- Hyundai Tucson Kia - model
- 2006-2010 - year
How an ABS pump with control module works
The valves in the hydraulic block open and close many times per second, and the control module monitors their operation continuously. A failure of any of these parts turns on the ABS warning light.
Matching
Compare number 58920-2E000 in full with the number on your pump. Different versions were fitted to the same models, so the number decides the fit, not the model and year alone. Car versions differ in, among other things, ESP, brake type and engine. Compare the numbers with your pump or with the vehicle documents.
Symptoms of a faulty ABS pump
- valve fault codes appear,
- the ABS works unevenly,
- the warning light stays on even after a sensor replacement,
- the module stops responding after moisture gets in.
The brake system is crucial for safety - after replacement, bleed the brakes and have the ABS checked in a workshop.
Questions and answers
| What condition is this part in? |
|---|
| It is a used, working part in good condition. Please send any questions about its condition to us before buying. |
| Does the brake fluid need replacing after the pump is fitted? |
| The system has to be bled after the pump is replaced anyway, so it is a good moment to check the fluid and replace it if it is old. |
| Do you also sell ABS sensors or connectors? |
| This listing covers only the pump with control module. You will find additional parts in the other categories of the shop, or ask us about availability. |
Send a photo of your ABS pump or its number to contact@auto24parts.com and we will confirm whether this part will fit.
