A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump and control module Iveco Daily Bosch 504075553 0265231452 0265800376
Vendors's code: 504075553
Product code: 0265800376
Barcode:
Code 39:
ISBN:
€650.41
Price
€650.41
€800.00
Price
€800.00
Ask about the product
ABS pump and control module Iveco Daily Bosch 504075553 0265231452 0265800376
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
€30.00
-
shipping
(Poland)
from
€30.00
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
How do you check whether the ABS pump will fit the Iveco Daily?
This is a used, working ABS pump with control module for the Iveco Daily - numbers 504075553; 0265231452 / 0 265 231 452; 0265800376 / 0 265 800 376. Before buying, compare the numbers with the label on the module in your car.
ABS pump and control module Iveco Daily
When the ABS in the Iveco Daily stops working, the pump module with its control unit is often to blame. We offer a used, working unit in good condition.
Numbers to compare
- 504075553 - part number (OEM)
- 0265231452 / 0 265 231 452 - ABS pump number (Bosch)
- 0265800376 / 0 265 800 376 - ABS control module number (Bosch)
Application according to the listing
- Iveco Daily - model
- Bosch - manufacturer
How an ABS pump with control module works
The module is connected by brake lines to the master cylinder and to the wheel circuits. That is why cleanliness must be maintained during replacement and the system must be bled thoroughly.
Matching
Iveco marks this module with number 504075553 and Bosch with 0265231452 (pump) and 0265800376 (control module). Compare at least one of these numbers with the label on the module in your Daily.
Symptoms of a faulty ABS pump
- valve fault codes appear,
- the ABS works unevenly,
- the warning light stays on even after a sensor replacement,
- the module stops responding after moisture gets in.
Inspect the control module connector: corrosion or burnt contacts cause symptoms similar to faulty electronics.
Questions and answers
| Do you also sell ABS sensors or connectors? |
|---|
| This listing covers only the pump with control module. You will find additional parts in the other categories of the shop, or ask us about availability. |
| Where can I find the number on the module? |
| You will usually find the numbers on the label or housing of the module, visible after removing it from the car. If you cannot read them, send us a photo. |
| How can I check whether the pump will fit my car? |
| Compare the model, year and the numbers on the module fitted in your car with the numbers in the description. You can also send us a photo. |
Not sure? Send a photo of your module to contact@auto24parts.com - we will check it for you.
