A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump and control module Land Rover K8D214F447AL 28516229143
Vendors's code: K8D214F447AL
Product code: 28516229143
Barcode:
Code 39:
ISBN:
£308.87
Price
£308.87
£379.91
Price
£379.91
In stock
Ask about the product
ABS pump and control module Land Rover K8D214F447AL 28516229143
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
£22.79
-
shipping
(Poland)
from
£22.79
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
How do you choose an ABS pump for the Land Rover?
This is a used, working ABS pump with control module for the Land Rover - numbers K8D2-14F447-AL / K8D214F447AL; 28.5162-2914.3 / 28516229143. Before buying, compare the numbers with the label on the module in your car.
ABS pump and control module Land Rover
An ABS pump with electronics helps you keep control of the car during hard braking. The unit offered applies to: Land Rover; it is used, working and in good condition.
Numbers to compare
- K8D2-14F447-AL / K8D214F447AL - part number (OEM)
- 28.5162-2914.3 / 28516229143 - ABS control module number (ATE)
Application according to the listing
- Land Rover - model
- ATE - manufacturer
How an ABS pump with control module works
ABS does not shorten the braking distance in all conditions, but it lets you steer the car under hard braking. The pump with control module is the heart of this mechanism.
Matching
For this model we offer several pumps with different numbers. The number on the label decides, not the model name alone. Module numbers are written with spaces or as one string. We give both forms to make the part easier to find.
Symptoms of a faulty ABS pump
- the ABS warning light goes out and comes on by itself,
- the wheels lock under hard braking,
- the tester shows a control module or valve fault,
- traction control switches off.
If the brake system has been opened, it must be bled after fitting, often using a diagnostic tool that controls the ABS valves.
Questions and answers
| Is the part new? |
|---|
| The pump is used, but in working order. You will find its condition in the product features. |
| Does the brake fluid need replacing after the pump is fitted? |
| The system has to be bled after the pump is replaced anyway, so it is a good moment to check the fluid and replace it if it is old. |
| Is the control module included? |
| Yes, the listing covers the ABS pump together with the control module, as stated in the name. If you want to confirm the details of the set, write to us before buying. |
Send a photo of your ABS pump or its number to contact@auto24parts.com and we will confirm whether this part will fit.
