A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump and control module Mazda 5 7N612C405AA 06210206234
Vendors's code: 7N612C405AA
Product code: 06210950173
Barcode:
Code 39:
ISBN:
487,80 zł
Price
487,80 zł
600,00 zł
Price
600,00 zł
In stock
Ask about the product
ABS pump and control module Mazda 5 7N612C405AA 06210206234
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
120,00 zł
-
shipping
(Poland)
from
120,00 zł
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Does this ABS pump fit the Mazda 5?
This is a used, working ABS pump with control module for the Mazda 5 - numbers 7N61-2C405-AA / 7N612C405AA; 06.2102-0623.4 / 06210206234. Before buying, compare the numbers with the label on the module in your car.
ABS pump and control module Mazda 5
When the ABS in the Mazda 5 stops working, the pump module with its control unit is often to blame. We offer a used, working unit in good condition.
Numbers to compare
- 7N61-2C405-AA / 7N612C405AA - part number (OEM)
- 06.2102-0623.4 / 06210206234 - ABS pump number (ATE)
- 06.2109-5017.3 / 06210950173 - ABS control module number (ATE)
Application according to the listing
- Mazda 5 - model
- ATE - manufacturer
How an ABS pump with control module works
ABS does not shorten the braking distance in all conditions, but it lets you steer the car under hard braking. The pump with control module is the heart of this mechanism.
Matching
Compare number 7N61-2C405-AA in full with the number on your pump. Different versions were fitted to the same models, so the number decides the fit, not the model alone. After replacement the module may need coding or adaptation to the car. Check this for your model before ordering the part.
Symptoms of a faulty ABS pump
- the ABS warning light comes on once the car has warmed up,
- the brake pedal vibrates for no reason,
- no communication with the module over the CAN bus,
- the system switches to emergency mode.
Compare all the numbers with the label on your pump, because the same car model may have had several versions.
Questions and answers
| Is the part new? |
|---|
| The pump is used, but in working order. You will find its condition in the product features. |
| Which number matters most when choosing? |
| It is best to compare all the numbers on the module, above all the one marked as the manufacturer or OEM number. |
| Can I drive with the ABS warning light on? |
| Usually the car still brakes without ABS assistance, but the wheels can lock and ESP will not work. The repair should be done as soon as possible. |
If you have questions about the application, write to contact@auto24parts.com and give the number from the label.
