A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump and control module Mazda 7N612M110AA 06210952183
Vendors's code: 7N612M110AA
Product code: 06210952183
Barcode:
Code 39:
ISBN:
487,80 zł
Price
487,80 zł
600,00 zł
Price
600,00 zł
In stock
Ask about the product
ABS pump and control module Mazda 7N612M110AA 06210952183
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
120,00 zł
-
shipping
(Poland)
from
120,00 zł
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Does this ABS pump fit the Mazda?
This is a used, working ABS pump with control module for the Mazda - numbers 7N61-2M110-AA / 7N612M110AA; 06.2109-5218.3 / 06210952183. Before buying, compare the numbers with the label on the module in your car.
ABS pump and control module Mazda
An ABS pump with control module is one of the key active safety components. This listing applies to: Mazda; the part is used, working and in good condition.
Numbers to compare
- 7N61-2M110-AA / 7N612M110AA - part number (OEM)
- 06.2109-5218.3 / 06210952183 - ABS control module number (ATE)
Application according to the listing
- Mazda - model
- ATE - manufacturer
How an ABS pump with control module works
During normal driving the system is passive and the brakes work conventionally. Only under hard braking does the pump start to pulse, and you can feel vibrations in the brake pedal.
Matching
We also offer other pumps for this model with different numbers. Choose by the number on the module, not by the model alone. After replacement the module may need coding or adaptation to the car. Check this for your model before ordering the part.
Symptoms of a faulty ABS pump
- the ABS warning light comes on once the car has warmed up,
- the brake pedal vibrates for no reason,
- no communication with the module over the CAN bus,
- the system switches to emergency mode.
Remember that after replacement the module may need coding or adaptation - check this for your model.
Questions and answers
| Is the part new? |
|---|
| The pump is used, but in working order. You will find its condition in the product features. |
| Does the brake fluid need replacing after the pump is fitted? |
| The system has to be bled after the pump is replaced anyway, so it is a good moment to check the fluid and replace it if it is old. |
| Do the brakes need bleeding after replacement? |
| Yes, once the brake system has been opened it must be bled. In many cars this is done with a diagnostic tool that activates the ABS valves. |
Not sure? Send a photo of your module to contact@auto24parts.com - we will check it for you.
