A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump and control module Mazda BPM543FA0 06210233954
Vendors's code: BPM543FA0
Product code: 28515832003
Barcode:
Code 39:
ISBN:
€569.11
Price
€569.11
€700.00
Price
€700.00
Ask about the product
ABS pump and control module Mazda BPM543FA0 06210233954
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
€30.00
-
shipping
(Poland)
from
€30.00
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
How do you check whether the ABS pump will fit the Mazda?
This is a used, working ABS pump with control module for the Mazda - numbers BPM543FA0; 06.2102-3395.4 / 06210233954. Before buying, compare the numbers with the label on the module in your car.
ABS pump and control module Mazda
This ABS pump with control module is intended for: Mazda. It is a used, working part in good technical condition.
Numbers to compare
- BPM543FA0 - part number (OEM)
- 06.2102-3395.4 / 06210233954 - ABS pump number (ATE)
- 06.2109-7233.3 / 06210972333 - ABS control module number (ATE)
- 28.5158-3200.3 / 28515832003 - ABS control module number (ATE)
Application according to the listing
- Mazda - model
- ATE - manufacturer
How an ABS pump with control module works
The return pump motor runs only when ABS is active. The rest of the time it puts no load on the electrical system, but together with the valves it is one of the parts most exposed to wear.
Matching
We also offer other pumps for this model with different numbers. Choose by the number on the module, not by the model alone. After replacement the module may need coding or adaptation to the car. Check this for your model before ordering the part.
Symptoms of a faulty ABS pump
- the ABS warning light comes on straight after starting the engine,
- the diagnostic tester cannot connect to the module,
- the speedometer shows incorrect readings,
- the system works only intermittently.
Remember that after replacement the module may need coding or adaptation - check this for your model.
Questions and answers
| What condition is this part in? |
|---|
| It is a used, working part in good condition. Please send any questions about its condition to us before buying. |
| What should I check on delivery? |
| Check that the numbers match the description and that the connector, ports and housing show no cracks or signs of corrosion. |
| Which number matters most when choosing? |
| It is best to compare all the numbers on the module, above all the one marked as the manufacturer or OEM number. |
If you have questions about the application, write to contact@auto24parts.com and give the number from the label.
