A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump and control module Mazda C513437A2B 28561209013
Vendors's code: C513437A2B
Product code: 28561209013
Barcode:
Code 39:
ISBN:
€284.55
Price
€284.55
€350.00
Price
€350.00
In stock
Ask about the product
ABS pump and control module Mazda C513437A2B 28561209013
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
€30.00
-
shipping
(Poland)
from
€30.00
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
ABS pump for the Mazda - what to check before buying?
This is a used, working ABS pump with control module for the Mazda - numbers C513-437A2-B / C513437A2B; 28.5612-0901.3 / 28561209013. Before buying, compare the numbers with the label on the module in your car.
ABS pump and control module Mazda
This ABS pump with control module is intended for: Mazda. It is a used, working part in good technical condition.
Numbers to compare
- C513-437A2-B / C513437A2B - part number (OEM)
- 28.5612-0901.3 / 28561209013 - ABS control module number (ATE)
Application according to the listing
- Mazda - model
- ATE - manufacturer
How an ABS pump with control module works
In cars with ESP or traction control, the same module can also build up pressure at a selected wheel to stabilise the vehicle. The range of functions depends on the equipment of the specific car.
Matching
The marking C513437A2B is easy to confuse with version C513437AZB, which has the letter Z instead of the digit 2. The control unit number 28561209013 is the same in both versions, but the part number (OEM) is different, so compare every character with the label on your pump.
Symptoms of a faulty ABS pump
- ABS does not react to wheel slip,
- ESP or ASR does not switch on,
- power supply faults in the diagnostic memory,
- signs of corrosion are visible on the connector.
Check the level and condition of the brake fluid; old or contaminated fluid accelerates wear of the valves in the hydraulic unit.
Questions and answers
| What condition is this part in? |
|---|
| It is a used, working part in good condition. The condition is also given in the product features. |
| What should I check on delivery? |
| Check that the numbers match the description and that the connector, ports and housing show no cracks or signs of corrosion. |
| Is the control module included? |
| Yes, the listing covers the ABS pump together with the control module, as stated in the name. If you want to confirm the details of the set, write to us before buying. |
Not sure? Write to contact@auto24parts.com and we will help you choose the right ABS pump for your car.
