A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump and control module Mazda DH0M437A0 0265259214
Vendors's code: DH0M437A0
Product code: 0265956315
Barcode:
Code 39:
ISBN:
813,01 zł
Price
813,01 zł
1 000,00 zł
Price
1 000,00 zł
In stock
Ask about the product
ABS pump and control module Mazda DH0M437A0 0265259214
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
120,00 zł
-
shipping
(Poland)
from
120,00 zł
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Looking for an ABS pump with electronics for the Mazda?
This is a used, working ABS pump with control module for the Mazda - numbers DH0M437A0; 0265259214. Before buying, compare the numbers with the label on the module in your car.
ABS pump and control module Mazda
An ABS pump with control module is one of the key active safety components. This listing applies to: Mazda; the part is used, working and in good condition.
Numbers to compare
- DH0M437A0 - part number (OEM)
- 0265259214 - ABS pump number (Bosch)
- 0265956315 - ABS control module number (Bosch)
Application according to the listing
- Mazda - model
- Bosch - manufacturer
How an ABS pump with control module works
One module contains two parts: the hydraulic block with valves and pump, and the electronics that control them. Both work together within fractions of a second, especially on slippery surfaces.
Matching
For this model we offer several pumps with different numbers. The number on the label decides, not the model name alone. The brake system is critical for safety, so fitting is best left to a workshop that will bleed the brakes and check ABS operation.
Symptoms of a faulty ABS pump
- the ABS warning light goes out and comes on by itself,
- the wheels lock under hard braking,
- the tester shows a control module or valve fault,
- traction control switches off.
Start by checking the fuse and connectors; replace the pump only when the wiring and sensors are in working order.
Questions and answers
| What condition is this part in? |
|---|
| It is a used, working part in good condition. Please send any questions about its condition to us before buying. |
| Why is the number written in several ways? |
| The same number may be written with spaces, hyphens or as one string. We give both forms to make it easier to find. |
| Does the brake fluid need replacing after the pump is fitted? |
| The system has to be bled after the pump is replaced anyway, so it is a good moment to check the fluid and replace it if it is old. |
If you have questions about the application, write to contact@auto24parts.com and give the number from the label.
