A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump and control module Mercedes-Benz A9069001601 0265242616
Vendors's code: A9069001601
Product code: 0265956032
Barcode:
Code 39:
ISBN:
1 626,02 zł
Price
1 626,02 zł
2 000,00 zł
Price
2 000,00 zł
Ask about the product
ABS pump and control module Mercedes-Benz A9069001601 0265242616
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
120,00 zł
-
shipping
(Poland)
from
120,00 zł
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
ABS pump number A9069001601 - is this the right part?
This is a used, working ABS pump with control module for the Mercedes-Benz - numbers A9069001601; 0265242616. Before buying, compare the numbers with the label on the module in your car.
ABS pump and control module Mercedes-Benz
According to the listing, this hydraulic unit with electronics fits the Mercedes-Benz. It is a used, working part in good condition - choose it by the numbers in the list.
Numbers to compare
- A9069001601 - part number (OEM)
- 0265242616 - ABS pump number (Bosch)
- 0265956032 - ABS control module number (Bosch)
Application according to the listing
- Mercedes-Benz - model
- Bosch - manufacturer
How an ABS pump with control module works
The module electronics store fault codes that can be read with a diagnostic tool. This makes it easier to determine whether the sensors, the wiring or the hydraulic unit itself is to blame.
Matching
For this model we offer several pumps with different numbers. The number on the label decides, not the model name alone. Modules differ, among other things, in the layout of the brake line ports and the connector. Always compare the numbers and the appearance of your pump with the unit in the listing.
Symptoms of a faulty ABS pump
- the ABS and brake warning lights do not go out after switching on the ignition,
- no wheel speed reading,
- the car reports sensor faults even though the sensors work,
- the module overheats or resets.
If the brake system has been opened, it must be bled after fitting, often using a diagnostic tool that controls the ABS valves.
Questions and answers
| Is the part new? |
|---|
| The pump is used, but in working order. You will find its condition in the product features. |
| Can I fit a pump from a different equipment version? |
| We do not assume so. Modules differ in functions (ABS, ESP, ASR) and software, so compare the numbers and the version of your car. |
| How can I check whether the pump will fit my car? |
| Compare the model, year and the numbers on the module fitted in your car with the numbers in the description. You can also send us a photo. |
Not sure? Write to contact@auto24parts.com and we will help you choose the right ABS pump for your car.
