A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump and control module Mini Cooper 3451981383001
Vendors's code: 3451981383001
Product code: 3451981383001
Barcode:
Code 39:
ISBN:
£123.02
Price
£123.02
£151.32
Price
£151.32
In stock
Ask about the product
ABS pump and control module Mini Cooper 3451981383001
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
£22.70
-
shipping
(Poland)
from
£22.70
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
How do you choose an ABS pump for the Mini Cooper?
This is a used, working ABS pump with control module for the Mini Cooper - numbers 3451 9813830 01 / 3451981383001. Before buying, compare the numbers with the label on the module in your car.
ABS pump and control module Mini Cooper
An ABS pump with control module is the hydraulic unit of the brake system combined with a control module that analyses signals from the wheel sensors and controls the pressure in the brake circuits. This listing applies to: Mini Cooper. The part is used, working and in good condition.
Numbers to compare
- 3451 9813830 01 / 3451981383001 - part number (OEM)
Application according to the listing
- Mini Cooper - model
How an ABS pump with control module works
The return pump motor runs only when ABS is active. The rest of the time it puts no load on the electrical system, but together with the valves it is one of the parts most exposed to wear.
Matching
For this model we offer several pumps with different numbers. The number on the label decides, not the model name alone. Car versions differ in, among other things, ESP, brake type and engine. Compare the numbers with your pump or with the vehicle documents.
Symptoms of a faulty ABS pump
- the ABS and brake warning lights do not go out after switching on the ignition,
- no wheel speed reading,
- the car reports sensor faults even though the sensors work,
- the module overheats or resets.
If the brake system has been opened, it must be bled after fitting, often using a diagnostic tool that controls the ABS valves.
Questions and answers
| What does “used, working” mean? |
|---|
| We sell it as a used part, in working order and in good condition; this information is also given in the listing features. |
| Where can I find the number on the module? |
| You will usually find the numbers on the label or housing of the module, visible after removing it from the car. If you cannot read them, send us a photo. |
| Can I drive with the ABS warning light on? |
| Usually the car still brakes without ABS assistance, but the wheels can lock and ESP will not work. The repair should be done as soon as possible. |
If you have questions about the application, write to contact@auto24parts.com and give the number from the label.
