A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump and control module MINI Cooper 7916180 7916181
Vendors's code: 3451791618001
Product code: 7916181
Barcode:
Code 39:
ISBN:
£246.04
Price
£246.04
£302.63
Price
£302.63
Ask about the product
ABS pump and control module MINI Cooper 7916180 7916181
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
£22.70
-
shipping
(Poland)
from
£22.70
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
How do you check whether the ABS pump will fit the MINI Cooper?
This is a used, working ABS pump with control module for the MINI Cooper - numbers 3451791618001 / 3451-7916180-01; 7916181. Before buying, compare the numbers with the label on the module in your car.
ABS pump and control module MINI Cooper
A used ABS pump is a way to repair the braking system without buying a new, expensive part. This listing applies to: MINI Cooper; the unit is working and in good condition.
Numbers to compare
- 3451791618001 / 3451-7916180-01 - part number (OEM)
- 7916181 - ABS control module number (OEM)
Application according to the listing
- MINI Cooper - model
- ATE - manufacturer
How an ABS pump with control module works
The hydraulic unit contains solenoid valves and a return pump motor. When the control module detects a wheel locking, the valves briefly reduce the pressure in its circuit and the pump returns the fluid, so the driver keeps control of the car's path.
Matching
Number 3451-7916180-01 comes from the MINI pump label and 7916181 is the control module number. Compare the middle part of the number, i.e. 7916180, with the marking on your module.
Symptoms of a faulty ABS pump
- a return pump fault is stored in the control module memory,
- ABS activates unnecessarily on a dry road surface,
- the ABS and ESP warning lights come on together,
- a pump supply voltage fault appears.
The brake system is crucial for safety - after replacement, bleed the brakes and have the ABS checked in a workshop.
Questions and answers
| Do you also sell ABS sensors or connectors? |
|---|
| This listing covers only the pump with control module. You will find additional parts in the other categories of the shop, or ask us about availability. |
| Does the brake fluid need replacing after the pump is fitted? |
| The system has to be bled after the pump is replaced anyway, so it is a good moment to check the fluid and replace it if it is old. |
| What should I check on delivery? |
| Check that the numbers match the description and that the connector, ports and housing show no cracks or signs of corrosion. |
If you have questions about the application, write to contact@auto24parts.com and give the number from the label.
