A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump and control module Mitsubishi 4670A643 06210220794
Vendors's code: 4670A643
Product code: 06210962983
Barcode:
Code 39:
ISBN:
975,61 zł
Price
975,61 zł
1 200,00 zł
Price
1 200,00 zł
Ask about the product
ABS pump and control module Mitsubishi 4670A643 06210220794
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
120,00 zł
-
shipping
(Poland)
from
120,00 zł
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
ABS pump number 4670A643 - is this the right part?
This is a used, working ABS pump with control module for the Mitsubishi - numbers 4670A643; 06.2102-2079.4 / 06210220794. Before buying, compare the numbers with the label on the module in your car.
ABS pump and control module Mitsubishi
A used ABS pump is a way to repair the braking system without buying a new, expensive part. This listing applies to: Mitsubishi; the unit is working and in good condition.
Numbers to compare
- 4670A643 - part number (OEM)
- 06.2102-2079.4 / 06210220794 - ABS pump number (ATE)
- 06.2109-6298.3 / 06210962983 - ABS control module number (ATE)
Application according to the listing
- Mitsubishi - model
- ATE - manufacturer
How an ABS pump with control module works
The module electronics store fault codes that can be read with a diagnostic tool. This makes it easier to determine whether the sensors, the wiring or the hydraulic unit itself is to blame.
Matching
We also offer other pumps for this model with different numbers. Choose by the number on the module, not by the model alone. The same car model may have had several module versions, depending on drive, equipment and year. The numbers in the list help to tell these versions apart.
Symptoms of a faulty ABS pump
- valve fault codes appear,
- the ABS works unevenly,
- the warning light stays on even after a sensor replacement,
- the module stops responding after moisture gets in.
If the brake system has been opened, it must be bled after fitting, often using a diagnostic tool that controls the ABS valves.
Questions and answers
| Is the part new? |
|---|
| The pump is used, but in working order. You will find its condition in the product features. |
| Do you also sell ABS sensors or connectors? |
| This listing covers only the pump with control module. You will find additional parts in the other categories of the shop, or ask us about availability. |
| Do the brakes need bleeding after replacement? |
| Yes, once the brake system has been opened it must be bled. In many cars this is done with a diagnostic tool that activates the ABS valves. |
Send questions about compatibility to contact@auto24parts.com - state the model, year and the number from the module.
