A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump and control module Mitsubishi Carisma 0265216464 0273004225
Vendors's code: 0265216464
Product code: ED2E-913F9
Barcode:
Code 39:
ISBN:
Ask about the product
ABS pump and control module Mitsubishi Carisma 0265216464 0273004225
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
£22.70
-
shipping
(Poland)
from
£22.70
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
ABS pump number 0265216464 - is this the right part?
This is a used, working ABS pump with control module for the Mitsubishi Carisma - numbers 0 265 216 464 / 0265216464; 0 273 004 225 / 0273004225. Before buying, compare the numbers with the label on the module in your car.
ABS pump and control module Mitsubishi Carisma
An ABS pump with control module is the hydraulic unit of the brake system combined with a control module that analyses signals from the wheel sensors and controls the pressure in the brake circuits. This listing applies to: Mitsubishi Carisma (1998). The part is used, working and in good condition.
Numbers to compare
- 0 265 216 464 / 0265216464 - ABS pump number (Bosch)
- 0 273 004 225 / 0273004225 - ABS control module number (Bosch)
Application according to the listing
- Mitsubishi Carisma - model
- 1998 - year
- Bosch - manufacturer
How an ABS pump with control module works
The control module receives signals from the wheel speed sensors and compares them. When one wheel slows down faster than the others, it controls the valves in the hydraulic block to prevent it from locking.
Matching
Compare number 0 265 216 464 in full with the number on your pump. Different versions were fitted to the same models, so the number decides the fit, not the model and year alone. The ABS pump is part of the safety system, so it is worth comparing the numbers carefully before buying. A mismatched version may not work with the car's sensors or wiring.
Symptoms of a faulty ABS pump
- an ABS fault appears after replacing the battery,
- the voltage at the module is unstable,
- the brake and ABS warning lights come on together,
- the brakes work, but without ABS assistance.
Before you buy a pump, check the fuse, power supply, earth and wheel speed sensors - a damaged wiring loom or sensor can cause similar symptoms.
Questions and answers
| Is the part new? |
|---|
| The pump is used, but in working order. You will find its condition in the product features. |
| Do the brakes need bleeding after replacement? |
| Yes, once the brake system has been opened it must be bled. In many cars this is done with a diagnostic tool that activates the ABS valves. |
Write to contact@auto24parts.com with the model, year and the number from your pump - we will check the fit.
