A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump and control module Mitsubishi Outlander 4670A550 06210957673
Vendors's code: 4670A550
Product code: 06210957673
Barcode:
Code 39:
ISBN:
£185.00
Price
£185.00
£227.54
Price
£227.54
Ask about the product
ABS pump and control module Mitsubishi Outlander 4670A550 06210957673
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
£22.75
-
shipping
(Poland)
from
£22.75
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Does this ABS pump fit the Mitsubishi Outlander?
This is a used, working ABS pump with control module for the Mitsubishi Outlander - numbers 4670A550; 06.2109-5767.3 / 06210957673. Before buying, compare the numbers with the label on the module in your car.
ABS pump and control module Mitsubishi Outlander
When the ABS in the Mitsubishi Outlander stops working, the pump module with its control unit is often to blame. We offer a used, working unit in good condition.
Numbers to compare
- 4670A550 - part number (OEM)
- 06.2109-5767.3 / 06210957673 - ABS control module number (ATE)
Application according to the listing
- Mitsubishi Outlander - model
- ATE - manufacturer
How an ABS pump with control module works
ABS does not shorten the braking distance in all conditions, but it lets you steer the car under hard braking. The pump with control module is the heart of this mechanism.
Matching
We also offer other pumps for this model with different numbers. Choose by the number on the module, not by the model alone. The brake system is critical for safety, so fitting is best left to a workshop that will bleed the brakes and check ABS operation.
Symptoms of a faulty ABS pump
- an ABS fault appears after replacing the battery,
- the voltage at the module is unstable,
- the brake and ABS warning lights come on together,
- the brakes work, but without ABS assistance.
Before buying, make sure the cause is not the power supply or the wiring loom, and only then replace the module.
Questions and answers
| What condition is this part in? |
|---|
| It is a used, working part in good condition. The condition is also given in the product features. |
| Which number matters most when choosing? |
| It is best to compare all the numbers on the module, above all the one marked as the manufacturer or OEM number. |
| Where can I find the number on the module? |
| You will usually find the numbers on the label or housing of the module, visible after removing it from the car. If you cannot read them, send us a photo. |
Send questions about compatibility to contact@auto24parts.com - state the model, year and the number from the module.
