A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump and control module Nissan 47660JD01C 0265230696
Vendors's code: 47660JD01C
Product code: 0265951224
Barcode:
Code 39:
ISBN:
€569.11
Price
€569.11
€700.00
Price
€700.00
In stock
Ask about the product
ABS pump and control module Nissan 47660JD01C 0265230696
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
€30.00
-
shipping
(Poland)
from
€30.00
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Does this ABS pump fit the Nissan?
This is a used, working ABS pump with control module for the Nissan - numbers 47660JD01C; 0265230696. Before buying, compare the numbers with the label on the module in your car.
ABS pump and control module Nissan
Looking for a replacement for a faulty ABS pump for the Nissan? We offer a used, working unit with electronics in good condition.
Numbers to compare
- 47660JD01C - part number (OEM)
- 0265230696 - ABS pump number (Bosch)
- 0265951224 - ABS control module number (Bosch)
Application according to the listing
- Nissan - model
- Bosch - manufacturer
How an ABS pump with control module works
The valves in the hydraulic block open and close many times per second, and the control module monitors their operation continuously. A failure of any of these parts turns on the ABS warning light.
Matching
For this model we offer several pumps with different numbers. The number on the label decides, not the model name alone. After replacement the module may need coding or adaptation to the car. Check this for your model before ordering the part.
Symptoms of a faulty ABS pump
- the ABS warning light comes on once the car has warmed up,
- the brake pedal vibrates for no reason,
- no communication with the module over the CAN bus,
- the system switches to emergency mode.
It is worth reading the fault codes with a diagnostic tool first, because some ABS faults come from wheel sensors or wiring, not from the hydraulic unit itself.
Questions and answers
| Is the part new? |
|---|
| The pump is used, but in working order. You will find its condition in the product features. |
| What should I check on delivery? |
| Check that the numbers match the description and that the connector, ports and housing show no cracks or signs of corrosion. |
| Does the brake fluid need replacing after the pump is fitted? |
| The system has to be bled after the pump is replaced anyway, so it is a good moment to check the fluid and replace it if it is old. |
If you have questions about the application, write to contact@auto24parts.com and give the number from the label.
