A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump and control module Nissan 47660JX52A 0265251857
Vendors's code: 47660JX52A
Product code: 0265951751
Barcode:
Code 39:
ISBN:
$499.07
Price
$499.07
$613.86
Price
$613.86
Ask about the product
ABS pump and control module Nissan 47660JX52A 0265251857
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
$30.69
-
shipping
(Poland)
from
$30.69
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Looking for an ABS pump with electronics for the Nissan?
This is a used, working ABS pump with control module for the Nissan - numbers 47660JX52A; 0 265 251 857 / 0265251857. Before buying, compare the numbers with the label on the module in your car.
ABS pump and control module Nissan
When the ABS in the Nissan stops working, the pump module with its control unit is often to blame. We offer a used, working unit in good condition.
Numbers to compare
- 47660JX52A - part number (OEM)
- 0 265 251 857 / 0265251857 - ABS pump number (Bosch)
- 0 265 951 751 / 0265951751 - ABS control module number (Bosch)
Application according to the listing
- Nissan - model
- Bosch - manufacturer
How an ABS pump with control module works
In cars with ESP or traction control, the same module can also build up pressure at a selected wheel to stabilise the vehicle. The range of functions depends on the equipment of the specific car.
Matching
We also offer other pumps for this model with different numbers. Choose by the number on the module, not by the model alone. This listing covers the set described in the name, i.e. the ABS pump with control module. We will confirm the details of the set on request.
Symptoms of a faulty ABS pump
- ABS does not react to wheel slip,
- ESP or ASR does not switch on,
- power supply faults in the diagnostic memory,
- signs of corrosion are visible on the connector.
Start by checking the fuse and connectors; replace the pump only when the wiring and sensors are in working order.
Questions and answers
| Is the part new? |
|---|
| The pump is used, but in working order. You will find its condition in the product features. |
| How can I check whether the pump will fit my car? |
| Compare the model, year and the numbers on the module fitted in your car with the numbers in the description. You can also send us a photo. |
| Can I fit a pump from a different equipment version? |
| We do not assume so. Modules differ in functions (ABS, ESP, ASR) and software, so compare the numbers and the version of your car. |
Send questions about compatibility to contact@auto24parts.com - state the model, year and the number from the module.
