A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump and control module Nissan Juke 476601KD1A 0727L081
Vendors's code: 476601KD1A
Product code: A98000B49
Barcode:
Code 39:
ISBN:
$143.98
Price
$143.98
$177.10
Price
$177.10
In stock
Ask about the product
ABS pump and control module Nissan Juke 476601KD1A 0727L081
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
$30.36
-
shipping
(Poland)
from
$30.36
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
ABS pump for the Nissan Juke - what to check before buying?
This is a used, working ABS pump with control module for the Nissan Juke - numbers 47660 1KD1A / 476601KD1A; 0727L081. Before buying, compare the numbers with the label on the module in your car.
ABS pump and control module Nissan Juke
This ABS pump with control module is intended for: Nissan Juke. It is a used, working part in good technical condition.
Numbers to compare
- 47660 1KD1A / 476601KD1A - part number (OEM)
- 0727L081 - part number (OEM)
- 07171726 - part number (OEM)
- A98000B49 - part number (OEM)
- TD8405 - part number (OEM)
Application according to the listing
- Nissan Juke - model
How an ABS pump with control module works
The module electronics store fault codes that can be read with a diagnostic tool. This makes it easier to determine whether the sensors, the wiring or the hydraulic unit itself is to blame.
Matching
Compare number 47660 1KD1A in full with the number on your pump. Different versions were fitted to the same models, so the number decides the fit, not the model alone. The electronics and the hydraulic block are matched to each other, so we treat the listing as a set that should be compared with the original by its numbers.
Symptoms of a faulty ABS pump
- an ABS fault appears after replacing the battery,
- the voltage at the module is unstable,
- the brake and ABS warning lights come on together,
- the brakes work, but without ABS assistance.
Before you buy a pump, check the fuse, power supply, earth and wheel speed sensors - a damaged wiring loom or sensor can cause similar symptoms.
Questions and answers
| What condition is this part in? |
|---|
| It is a used, working part in good condition. The condition is also given in the product features. |
| Can I drive with the ABS warning light on? |
| Usually the car still brakes without ABS assistance, but the wheels can lock and ESP will not work. The repair should be done as soon as possible. |
| Do the brakes need bleeding after replacement? |
| Yes, once the brake system has been opened it must be bled. In many cars this is done with a diagnostic tool that activates the ABS valves. |
Not sure? Write to contact@auto24parts.com and we will help you choose the right ABS pump for your car.
