A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump and control module Nissan Patrol 11000031320 47660VC300
Vendors's code: 11000031320
Product code: C480-6215E
Barcode:
Code 39:
ISBN:
Ask about the product
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Nissan Patrol - is this the right ABS pump for your car?
This is a used, working ABS pump with control module for the Nissan Patrol - numbers 11000031320; 47660 VC300 / 47660VC300. Before buying, compare the numbers with the label on the module in your car.
ABS pump and control module Nissan Patrol
In the Nissan Patrol (1998-2004), the hydraulic unit with control module decides when and how much to reduce the pressure in the brakes of individual wheels. We sell a used, working unit in good condition.
Numbers to compare
- 11000031320 - part number (OEM)
- 47660 VC300 / 47660VC300 - part number (OEM)
Application according to the listing
- Nissan Patrol - model
- 1998-2004 - year
How an ABS pump with control module works
One module contains two parts: the hydraulic block with valves and pump, and the electronics that control them. Both work together within fractions of a second, especially on slippery surfaces.
Matching
For this model we offer several pumps with different numbers. The number on the label decides, not the model name alone. The electronics and the hydraulic block are matched to each other, so we treat the listing as a set that should be compared with the original by its numbers.
Symptoms of a faulty ABS pump
- an ABS fault appears after replacing the battery,
- the voltage at the module is unstable,
- the brake and ABS warning lights come on together,
- the brakes work, but without ABS assistance.
Remember that after replacement the module may need coding or adaptation - check this for your model.
Questions and answers
| What does “used, working” mean? |
|---|
| We sell it as a used part, in working order and in good condition; this information is also given in the listing features. |
| Does the brake fluid need replacing after the pump is fitted? |
| The system has to be bled after the pump is replaced anyway, so it is a good moment to check the fluid and replace it if it is old. |
| What should I check on delivery? |
| Check that the numbers match the description and that the connector, ports and housing show no cracks or signs of corrosion. |
Not sure? Write to contact@auto24parts.com and we will help you choose the right ABS pump for your car.