A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump and control module Nissan Pixo Suzuki Alto 68K0 JP 2WD / 06210213884
Vendors's code: 68K0JP2WD
Product code: 28570049053
Barcode:
Code 39:
ISBN:
€162.60
Price
€162.60
€200.00
Price
€200.00
In stock
Ask about the product
ABS pump and control module Nissan Pixo Suzuki Alto 68K0 JP 2WD / 06210213884
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
€30.00
-
shipping
(Poland)
from
€30.00
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
ABS pump for the Nissan Pixo Suzuki Alto - what to check before buying?
This is a used, working ABS pump with control module for the Nissan Pixo Suzuki Alto - numbers 68K0 JP 2WD / 68K0JP2WD; 06.2102-1388.4 / 06210213884. Before buying, compare the numbers with the label on the module in your car.
ABS pump and control module Nissan Pixo Suzuki Alto
An ABS pump with control module is the hydraulic unit of the brake system combined with a control module that analyses signals from the wheel sensors and controls the pressure in the brake circuits. This listing applies to: Nissan Pixo Suzuki Alto (2009-2012). The part is used, working and in good condition.
Numbers to compare
- 68K0 JP 2WD / 68K0JP2WD - part number (OEM)
- 06.2102-1388.4 / 06210213884 - ABS pump number (ATE)
- 06.2109-5608.3 / 06210956083 - ABS control module number (ATE)
- 28.5700-4905.3 / 28570049053 - ABS control module number (ATE)
Application according to the listing
- Nissan Pixo Suzuki Alto - model
- 2009-2012 - year
- ATE - manufacturer
How an ABS pump with control module works
The valves in the hydraulic block open and close many times per second, and the control module monitors their operation continuously. A failure of any of these parts turns on the ABS warning light.
Matching
The number 68K0 JP 2WD also appears in another listing. Compare all the numbers with the label on your pump - we do not assume that listings are interchangeable. Module numbers are written with spaces or as one string. We give both forms to make the part easier to find.
Symptoms of a faulty ABS pump
- the ABS warning light goes out and comes on by itself,
- the wheels lock under hard braking,
- the tester shows a control module or valve fault,
- traction control switches off.
Before buying, make sure the cause is not the power supply or the wiring loom, and only then replace the module.
Questions and answers
| What condition is this part in? |
|---|
| It is a used, working part in good condition. Please send any questions about its condition to us before buying. |
| Can I fit a pump from a different equipment version? |
| We do not assume so. Modules differ in functions (ABS, ESP, ASR) and software, so compare the numbers and the version of your car. |
| Does the control module need coding after the pump is replaced? |
| It depends on the make, model and version. Before buying, check whether your car needs adaptation or coding after the replacement. |
Send questions about compatibility to contact@auto24parts.com - state the model, year and the number from the module.
