A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump and control module Nissan Primera 47660AV712 0265800334
Vendors's code: 47660AV712
Product code: 0265800334
Barcode:
Code 39:
ISBN:
Ask about the product
ABS pump and control module Nissan Primera 47660AV712 0265800334
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
€30.00
-
shipping
(Poland)
from
€30.00
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
ABS pump number 47660AV712 - is this the right part?
This is a used, working ABS pump with control module for the Nissan Primera - numbers 47660 AV712 / 47660AV712; 0 265 231 317 / 0265231317. Before buying, compare the numbers with the label on the module in your car.
ABS pump and control module Nissan Primera
For the Nissan Primera (2004) we offer a used ABS pump together with its control module, which you can match by the numbers in the list. It is working and in good condition.
Numbers to compare
- 47660 AV712 / 47660AV712 - part number (OEM)
- 0 265 231 317 / 0265231317 - ABS pump number (Bosch)
- 0 265 800 334 / 0265800334 - ABS control module number (Bosch)
Application according to the listing
- Nissan Primera - model
- 2004 - year
- Bosch - manufacturer
How an ABS pump with control module works
In cars with ESP or traction control, the same module can also build up pressure at a selected wheel to stabilise the vehicle. The range of functions depends on the equipment of the specific car.
Matching
The number 47660 AV712 also appears in another listing. Compare all the numbers with the label on your pump - we do not assume that listings are interchangeable. After replacement the module may need coding or adaptation to the car. Check this for your model before ordering the part.
Symptoms of a faulty ABS pump
- the ABS warning light goes out and comes on by itself,
- the wheels lock under hard braking,
- the tester shows a control module or valve fault,
- traction control switches off.
Inspect the control module connector: corrosion or burnt contacts cause symptoms similar to faulty electronics.
Questions and answers
| What does “used, working” mean? |
|---|
| We sell it as a used part, in working order and in good condition; this information is also given in the listing features. |
| Is the control module included? |
| Yes, the listing covers the ABS pump together with the control module, as stated in the name. If you want to confirm the details of the set, write to us before buying. |
| Does the control module need coding after the pump is replaced? |
| It depends on the make, model and version. Before buying, check whether your car needs adaptation or coding after the replacement. |
Not sure? Write to contact@auto24parts.com and we will help you choose the right ABS pump for your car.
