A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump and control module Nissan Qashqai 47660JD000 0265231899
Vendors's code: 47660JD000
Product code: 0265800609
Barcode:
Code 39:
ISBN:
$83.17
Price
$83.17
$102.30
Price
$102.30
Ask about the product
ABS pump and control module Nissan Qashqai 47660JD000 0265231899
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
$30.69
-
shipping
(Poland)
from
$30.69
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
How do you choose an ABS pump for the Nissan Qashqai?
This is a used, working ABS pump with control module for the Nissan Qashqai - numbers 47660 JD000 / 47660JD000; 0 265 231 899 / 0265231899. Before buying, compare the numbers with the label on the module in your car.
ABS pump and control module Nissan Qashqai
When the ABS in the Nissan Qashqai (2007) stops working, the pump module with its control unit is often to blame. We offer a used, working unit in good condition.
Numbers to compare
- 47660 JD000 / 47660JD000 - part number (OEM)
- 0 265 231 899 / 0265231899 - ABS pump number (Bosch)
- 0 265 800 609 / 0265800609 - ABS control module number (Bosch)
Application according to the listing
- Nissan Qashqai - model
- 2007 - year
- Bosch - manufacturer
How an ABS pump with control module works
The control module receives signals from the wheel speed sensors and compares them. When one wheel slows down faster than the others, it controls the valves in the hydraulic block to prevent it from locking.
Matching
We also offer other pumps for this model with different numbers. Choose by the number on the module, not by the model and year alone. Car versions differ in, among other things, ESP, brake type and engine. Compare the numbers with your pump or with the vehicle documents.
Symptoms of a faulty ABS pump
- an ABS fault appears after replacing the battery,
- the voltage at the module is unstable,
- the brake and ABS warning lights come on together,
- the brakes work, but without ABS assistance.
Inspect the control module connector: corrosion or burnt contacts cause symptoms similar to faulty electronics.
Questions and answers
| Is the part new? |
|---|
| The pump is used, but in working order. You will find its condition in the product features. |
| Why is the number written in several ways? |
| The same number may be written with spaces, hyphens or as one string. We give both forms to make it easier to find. |
| Do you also sell ABS sensors or connectors? |
| This listing covers only the pump with control module. You will find additional parts in the other categories of the shop, or ask us about availability. |
If you have questions about the application, write to contact@auto24parts.com and give the number from the label.
