A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump and control module Nissan Suzuki 68K0 JP 2WD / 06210953923
Vendors's code: 68K0JP2WD
Product code: 06210953923
Barcode:
Code 39:
ISBN:
$165.41
Price
$165.41
$203.45
Price
$203.45
In stock
Ask about the product
ABS pump and control module Nissan Suzuki 68K0 JP 2WD / 06210953923
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
$30.52
-
shipping
(Poland)
from
$30.52
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
ABS pump for the Nissan Suzuki - what to check before buying?
This is a used, working ABS pump with control module for the Nissan Suzuki - numbers 68K0 JP 2WD / 68K0JP2WD; 06.2109-5392.3 / 06210953923. Before buying, compare the numbers with the label on the module in your car.
ABS pump and control module Nissan Suzuki
An ABS pump with control module is the hydraulic unit of the brake system combined with a control module that analyses signals from the wheel sensors and controls the pressure in the brake circuits. This listing applies to: Nissan Suzuki. The part is used, working and in good condition.
Numbers to compare
- 68K0 JP 2WD / 68K0JP2WD - part number (OEM)
- 06.2102-1036.4 / 06210210364 - ABS pump number (ATE)
- 06.2109-5392.3 / 06210953923 - ABS control module number (ATE)
Application according to the listing
- Nissan Suzuki - model
- ATE - manufacturer
How an ABS pump with control module works
One module contains two parts: the hydraulic block with valves and pump, and the electronics that control them. Both work together within fractions of a second, especially on slippery surfaces.
Matching
The number 68K0 JP 2WD also appears in another listing. Compare all the numbers with the label on your pump - we do not assume that listings are interchangeable. The fit is decided first of all by the part number, and only then by the model and year, because different modules were used within one model.
Symptoms of a faulty ABS pump
- the ABS warning light comes on once the car has warmed up,
- the brake pedal vibrates for no reason,
- no communication with the module over the CAN bus,
- the system switches to emergency mode.
Remember that after replacement the module may need coding or adaptation - check this for your model.
Questions and answers
| What condition is this part in? |
|---|
| It is a used, working part in good condition. Please send any questions about its condition to us before buying. |
| Can I drive with the ABS warning light on? |
| Usually the car still brakes without ABS assistance, but the wheels can lock and ESP will not work. The repair should be done as soon as possible. |
| Is the control module included? |
| Yes, the listing covers the ABS pump together with the control module, as stated in the name. If you want to confirm the details of the set, write to us before buying. |
If you have questions about the application, write to contact@auto24parts.com and give the number from the label.
