A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump and control module Opel Astra G Zafira 90581417 0265216651
Vendors's code: 90581417
Product code: 0265216651
Barcode:
Code 39:
ISBN:
Ask about the product
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
How do you choose an ABS pump for the Opel Astra G Zafira?
This is a used, working ABS pump with control module for the Opel Astra G Zafira - numbers 90 581 417 / 90581417; 0 265 216 651 / 0265216651. Before buying, compare the numbers with the label on the module in your car.
ABS pump and control module Opel Astra G Zafira
This ABS pump with control module is intended for: Opel Astra G Zafira (2000-2005). It is a used, working part in good technical condition.
Numbers to compare
- 90 581 417 / 90581417 - part number (OEM)
- 0 265 216 651 / 0265216651 - ABS pump number (Bosch)
- 0 273 004 362 / 0273004362 - ABS control module number (Bosch)
Application according to the listing
- Opel Astra G Zafira - model
- 2000-2005 - year
- Bosch - manufacturer
How an ABS pump with control module works
The control module receives signals from the wheel speed sensors and compares them. When one wheel slows down faster than the others, it controls the valves in the hydraulic block to prevent it from locking.
Matching
For this model we offer several pumps with different numbers. The number on the label decides, not the model name alone. Car versions differ in, among other things, ESP, brake type and engine. Compare the numbers with your pump or with the vehicle documents.
Symptoms of a faulty ABS pump
- the pump motor does not start,
- an unusual noise can be heard when braking,
- brake fluid leaks from the hydraulic unit,
- the brake pedal is hard or sinks.
Check the level and condition of the brake fluid; old or contaminated fluid accelerates wear of the valves in the hydraulic unit.
Questions and answers
| What condition is this part in? |
|---|
| It is a used, working part in good condition. Please send any questions about its condition to us before buying. |
| Where can I find the number on the module? |
| You will usually find the numbers on the label or housing of the module, visible after removing it from the car. If you cannot read them, send us a photo. |
| Where does this part come from? |
| The pump is used and comes from a dismantled vehicle. We give the manufacturer and OEM numbers in the description so that you can compare them. |
Not sure? Write to contact@auto24parts.com and we will help you choose the right ABS pump for your car.