A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump and control module Opel Astra J 13332612 10020604084
Vendors's code: 13332612
Product code: 10096045093
Barcode:
Code 39:
ISBN:
£152.00
Price
£152.00
£152.00
Price
£152.00
In stock
Ask about the product
ABS pump and control module Opel Astra J 13332612 10020604084
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
£22.80
-
shipping
(Poland)
from
£22.80
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
How do you check whether the ABS pump will fit the Opel Astra J?
This is a used, working ABS pump with control module for the Opel Astra J - numbers 13332612; 10.0206-0408.4 / 10020604084. Before buying, compare the numbers with the label on the module in your car.
ABS pump and control module Opel Astra J
This ABS pump with control module is intended for: Opel Astra J (2010). It is a used, working part in good technical condition.
Numbers to compare
- 13332612 - part number (OEM)
- 10.0206-0408.4 / 10020604084 - ABS pump number (ATE)
- 10.0960-4509.3 / 10096045093 - ABS control module number (ATE)
- 28.5600-4003.3 / 28560040033 - ABS control module number (ATE)
Application according to the listing
- Opel Astra J - model
- 2010 - year
- ATE - manufacturer
How an ABS pump with control module works
The module is connected by brake lines to the master cylinder and to the wheel circuits. That is why cleanliness must be maintained during replacement and the system must be bled thoroughly.
Matching
For this model we offer several pumps with different numbers. The number on the label decides, not the model name alone. The electronics and the hydraulic block are matched to each other, so we treat the listing as a set that should be compared with the original by its numbers.
Symptoms of a faulty ABS pump
- the pump motor does not start,
- an unusual noise can be heard when braking,
- brake fluid leaks from the hydraulic unit,
- the brake pedal is hard or sinks.
It is worth reading the fault codes with a diagnostic tool first, because some ABS faults come from wheel sensors or wiring, not from the hydraulic unit itself.
Questions and answers
| Is the part new? |
|---|
| The pump is used, but in working order. You will find its condition in the product features. |
| Can a pump with a different number fit as well? |
| Sometimes yes, but we do not assume that listings are interchangeable. Compare all the numbers with the label on your pump or ask us. |
| What should I check on delivery? |
| Check that the numbers match the description and that the connector, ports and housing show no cracks or signs of corrosion. |
Send a photo of your ABS pump or its number to contact@auto24parts.com and we will confirm whether this part will fit.
