A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump and control module Opel Astra J 13356789 10096145223
Vendors's code: 13356789
Product code: 28561181033
Barcode:
Code 39:
ISBN:
€300.00
Price
€300.00
€300.00
Price
€300.00
In stock
Ask about the product
ABS pump and control module Opel Astra J 13356789 10096145223
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
€30.00
-
shipping
(Poland)
from
€30.00
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Does this ABS pump fit the Opel Astra J?
This is a used, working ABS pump with control module for the Opel Astra J - numbers 13356789; 10.0961-4522.3 / 10096145223. Before buying, compare the numbers with the label on the module in your car.
ABS pump and control module Opel Astra J
A used ABS pump is a way to repair the braking system without buying a new, expensive part. This listing applies to: Opel Astra J; the unit is working and in good condition.
Numbers to compare
- 13356789 - part number (OEM)
- 10.0961-4522.3 / 10096145223 - ABS control module number (ATE)
- 28.5611-8103.3 / 28561181033 - ABS control module number (ATE)
Application according to the listing
- Opel Astra J - model
- ATE - manufacturer
How an ABS pump with control module works
The module is connected by brake lines to the master cylinder and to the wheel circuits. That is why cleanliness must be maintained during replacement and the system must be bled thoroughly.
Matching
We also offer other pumps for this model with different numbers. Choose by the number on the module, not by the model alone. The fit is decided first of all by the part number, and only then by the model and year, because different modules were used within one model.
Symptoms of a faulty ABS pump
- valve fault codes appear,
- the ABS works unevenly,
- the warning light stays on even after a sensor replacement,
- the module stops responding after moisture gets in.
Before buying, make sure the cause is not the power supply or the wiring loom, and only then replace the module.
Questions and answers
| What condition is this part in? |
|---|
| It is a used, working part in good condition. Please send any questions about its condition to us before buying. |
| Which number matters most when choosing? |
| It is best to compare all the numbers on the module, above all the one marked as the manufacturer or OEM number. |
| Why is the number written in several ways? |
| The same number may be written with spaces, hyphens or as one string. We give both forms to make it easier to find. |
If you have questions about the application, write to contact@auto24parts.com and give the number from the label.
