A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump and control module Opel Astra J 13412550 10020604494
Vendors's code: 13412550
Product code: 10096045843
Barcode:
Code 39:
ISBN:
569,11 zł
Price
569,11 zł
700,00 zł
Price
700,00 zł
Ask about the product
ABS pump and control module Opel Astra J 13412550 10020604494
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
120,00 zł
-
shipping
(Poland)
from
120,00 zł
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
ABS pump number 13412550 - is this the right part?
This is a used, working ABS pump with control module for the Opel Astra J - numbers 13412550; 10.0206-0449.4 / 10020604494. Before buying, compare the numbers with the label on the module in your car.
ABS pump and control module Opel Astra J
The set in this listing (ABS pump and control module) runs the anti-lock braking system in: Opel Astra J. Match it by the numbers in the list. It is used, working and in good condition.
Numbers to compare
- 13412550 - part number (OEM)
- 10.0206-0449.4 / 10020604494 - ABS pump number (ATE)
- 10.0960-4584.3 / 10096045843 - ABS control module number (ATE)
Application according to the listing
- Opel Astra J - model
- ATE - manufacturer
How an ABS pump with control module works
The return pump motor runs only when ABS is active. The rest of the time it puts no load on the electrical system, but together with the valves it is one of the parts most exposed to wear.
Matching
We also offer other pumps for this model with different numbers. Choose by the number on the module, not by the model alone. The brake system is critical for safety, so fitting is best left to a workshop that will bleed the brakes and check ABS operation.
Symptoms of a faulty ABS pump
- the ABS and brake warning lights do not go out after switching on the ignition,
- no wheel speed reading,
- the car reports sensor faults even though the sensors work,
- the module overheats or resets.
The brake system is crucial for safety - after replacement, bleed the brakes and have the ABS checked in a workshop.
Questions and answers
| What condition is this part in? |
|---|
| It is a used, working part in good condition. The condition is also given in the product features. |
| Which number matters most when choosing? |
| It is best to compare all the numbers on the module, above all the one marked as the manufacturer or OEM number. |
| Do you also sell ABS sensors or connectors? |
| This listing covers only the pump with control module. You will find additional parts in the other categories of the shop, or ask us about availability. |
Write to contact@auto24parts.com with the model, year and the number from your pump - we will check the fit.
