A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump and control module Opel Calibra 0265201019
Vendors's code: 0265201019
Product code: abs_0265201019
Barcode:
Code 39:
ISBN:
325,20 zł
Price
325,20 zł
400,00 zł
Price
400,00 zł
In stock
Ask about the product
ABS pump and control module Opel Calibra 0265201019
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
120,00 zł
-
shipping
(Poland)
from
120,00 zł
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Looking for an ABS pump with electronics for the Opel Calibra?
This is a used, working ABS pump with control module for the Opel Calibra - numbers 0 265 201 019 / 0265201019. Before buying, compare the numbers with the label on the module in your car.
ABS pump and control module Opel Calibra
For the Opel Calibra we offer a used ABS pump together with its control module, which you can match by the numbers in the list. It is working and in good condition.
Numbers to compare
- 0 265 201 019 / 0265201019 - ABS pump number (Bosch)
Application according to the listing
- Opel Calibra - model
- Bosch - manufacturer
How an ABS pump with control module works
The return pump motor runs only when ABS is active. The rest of the time it puts no load on the electrical system, but together with the valves it is one of the parts most exposed to wear.
Matching
For this model we offer several pumps with different numbers. The number on the label decides, not the model name alone. This listing covers the set described in the name, i.e. the ABS pump with control module. We will confirm the details of the set on request.
Symptoms of a faulty ABS pump
- the pump motor does not start,
- an unusual noise can be heard when braking,
- brake fluid leaks from the hydraulic unit,
- the brake pedal is hard or sinks.
Compare all the numbers with the label on your pump, because the same car model may have had several versions.
Questions and answers
| Is the part new? |
|---|
| The pump is used, but in working order. You will find its condition in the product features. |
| Which number matters most when choosing? |
| It is best to compare all the numbers on the module, above all the one marked as the manufacturer or OEM number. |
| Do you also sell ABS sensors or connectors? |
| This listing covers only the pump with control module. You will find additional parts in the other categories of the shop, or ask us about availability. |
Write to contact@auto24parts.com with the model, year and the number from your pump - we will check the fit.
