A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump and control module Opel Corsa C Combo Meriva 09127108EA 227386546381
Vendors's code: 09127108EA
Product code: 227386546381
Barcode:
Code 39:
ISBN:
Ask about the product
ABS pump and control module Opel Corsa C Combo Meriva 09127108EA 227386546381
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
£22.70
-
shipping
(Poland)
from
£22.70
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Opel Corsa C Combo Meriva - is this the right ABS pump for your car?
This is a used, working ABS pump with control module for the Opel Corsa C Combo Meriva - numbers 09127108 EA / 09127108EA; 227 386 54638 1 / 227386546381. Before buying, compare the numbers with the label on the module in your car.
ABS pump and control module Opel Corsa C Combo Meriva
This ABS pump with control module is intended for: Opel Corsa C Combo Meriva. It is a used, working part in good technical condition.
Numbers to compare
- 09127108 EA / 09127108EA - part number (OEM)
- 227 386 54638 1 / 227386546381 - part number (OEM)
- 0 265 216 478 / 0265216478 - ABS pump number (Bosch)
Application according to the listing
- Opel Corsa C Combo Meriva - model
- Bosch - manufacturer
How an ABS pump with control module works
The module electronics store fault codes that can be read with a diagnostic tool. This makes it easier to determine whether the sensors, the wiring or the hydraulic unit itself is to blame.
Matching
The number 09127108 EA also appears in another listing. Compare all the numbers with the label on your pump - we do not assume that listings are interchangeable. Modules differ, among other things, in the layout of the brake line ports and the connector. Always compare the numbers and the appearance of your pump with the unit in the listing.
Symptoms of a faulty ABS pump
- the ABS warning light goes out and comes on by itself,
- the wheels lock under hard braking,
- the tester shows a control module or valve fault,
- traction control switches off.
Remember that after replacement the module may need coding or adaptation - check this for your model.
Questions and answers
| What does “used, working” mean? |
|---|
| We sell it as a used part, in working order and in good condition; this information is also given in the listing features. |
| Does the control module need coding after the pump is replaced? |
| It depends on the make, model and version. Before buying, check whether your car needs adaptation or coding after the replacement. |
| Where can I find the number on the module? |
| You will usually find the numbers on the label or housing of the module, visible after removing it from the car. If you cannot read them, send us a photo. |
Write to contact@auto24parts.com with the model, year and the number from your pump - we will check the fit.
Customers Also Viewed
-
Price £94.57Price £76.89
