A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump and control module Opel Meriva 0265220596 0273004531
Vendors's code: 0265220596
Product code: FE46-80451
Barcode:
Code 39:
ISBN:
£185.87
Price
£185.87
£228.61
Price
£228.61
Ask about the product
ABS pump and control module Opel Meriva 0265220596 0273004531
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
£22.86
-
shipping
(Poland)
from
£22.86
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Opel Meriva - is this the right ABS pump for your car?
This is a used, working ABS pump with control module for the Opel Meriva - numbers 0 265 220 596 / 0265220596; 0 273 004 531 / 0273004531. Before buying, compare the numbers with the label on the module in your car.
ABS pump and control module Opel Meriva
A used ABS pump is a way to repair the braking system without buying a new, expensive part. This listing applies to: Opel Meriva; the unit is working and in good condition.
Numbers to compare
- 0 265 220 596 / 0265220596 - ABS pump number (Bosch)
- 0 273 004 531 / 0273004531 - ABS control module number (Bosch)
Application according to the listing
- Opel Meriva - model
- Bosch - manufacturer
How an ABS pump with control module works
In cars with ESP or traction control, the same module can also build up pressure at a selected wheel to stabilise the vehicle. The range of functions depends on the equipment of the specific car.
Matching
For this model we offer several pumps with different numbers. The number on the label decides, not the model name alone. Module numbers are written with spaces or as one string. We give both forms to make the part easier to find.
Symptoms of a faulty ABS pump
- a return pump fault is stored in the control module memory,
- ABS activates unnecessarily on a dry road surface,
- the ABS and ESP warning lights come on together,
- a pump supply voltage fault appears.
Start by checking the fuse and connectors; replace the pump only when the wiring and sensors are in working order.
Questions and answers
| Is the part new? |
|---|
| The pump is used, but in working order. You will find its condition in the product features. |
| Is the control module included? |
| Yes, the listing covers the ABS pump together with the control module, as stated in the name. If you want to confirm the details of the set, write to us before buying. |
| Why is the number written in several ways? |
| The same number may be written with spaces, hyphens or as one string. We give both forms to make it easier to find. |
Send a photo of your ABS pump or its number to contact@auto24parts.com and we will confirm whether this part will fit.
