A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump and control module Opel Meriva 1.7 CDTI 93388792EY 0265220658
Vendors's code: 93388792EY
Product code: 0273004655
Barcode:
Code 39:
ISBN:
Ask about the product
ABS pump and control module Opel Meriva 1.7 CDTI 93388792EY 0265220658
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
£22.79
-
shipping
(Poland)
from
£22.79
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Opel Meriva 1.7 CDTI - is this the right ABS pump for your car?
This is a used, working ABS pump with control module for the Opel Meriva 1.7 CDTI - numbers 93 388 792 EY / 93388792EY; 0 265 220 658 / 0265220658. Before buying, compare the numbers with the label on the module in your car.
ABS pump and control module Opel Meriva 1.7 CDTI
An ABS pump with control module is one of the key active safety components. This listing applies to: Opel Meriva 1.7 CDTI; the part is used, working and in good condition.
Numbers to compare
- 93 388 792 EY / 93388792EY - part number (OEM)
- 0 265 220 658 / 0265220658 - ABS pump number (Bosch)
- 0 273 004 655 / 0273004655 - ABS control module number (Bosch)
Application according to the listing
- Opel Meriva 1.7 CDTI - model
- Bosch - manufacturer
How an ABS pump with control module works
During normal driving the system is passive and the brakes work conventionally. Only under hard braking does the pump start to pulse, and you can feel vibrations in the brake pedal.
Matching
Compare number 93 388 792 EY in full with the number on your pump. Different versions were fitted to the same models, so the number decides the fit, not the model alone. This listing covers the set described in the name, i.e. the ABS pump with control module. We will confirm the details of the set on request.
Symptoms of a faulty ABS pump
- the ABS warning light goes out and comes on by itself,
- the wheels lock under hard braking,
- the tester shows a control module or valve fault,
- traction control switches off.
Before buying, make sure the cause is not the power supply or the wiring loom, and only then replace the module.
Questions and answers
| What condition is this part in? |
|---|
| It is a used, working part in good condition. Please send any questions about its condition to us before buying. |
| What should I check on delivery? |
| Check that the numbers match the description and that the connector, ports and housing show no cracks or signs of corrosion. |
| Where does this part come from? |
| The pump is used and comes from a dismantled vehicle. We give the manufacturer and OEM numbers in the description so that you can compare them. |
Send questions about compatibility to contact@auto24parts.com - state the model, year and the number from the module.
