A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump and control module Opel Meriva 13375034 0265238098
Vendors's code: 13375034
Product code: 0265951794
Barcode:
Code 39:
ISBN:
£247.82
Price
£247.82
£304.82
Price
£304.82
Ask about the product
ABS pump and control module Opel Meriva 13375034 0265238098
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
£22.86
-
shipping
(Poland)
from
£22.86
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
ABS pump for the Opel Meriva - what to check before buying?
This is a used, working ABS pump with control module for the Opel Meriva - numbers 13375034; 0 265 238 098 / 0265238098. Before buying, compare the numbers with the label on the module in your car.
ABS pump and control module Opel Meriva
According to the listing, this hydraulic unit with electronics fits the Opel Meriva. It is a used, working part in good condition - choose it by the numbers in the list.
Numbers to compare
- 13375034 - part number (OEM)
- 0 265 238 098 / 0265238098 - ABS pump number (Bosch)
- 0 265 951 794 / 0265951794 - ABS control module number (Bosch)
Application according to the listing
- Opel Meriva - model
- Bosch - manufacturer
How an ABS pump with control module works
The module is connected by brake lines to the master cylinder and to the wheel circuits. That is why cleanliness must be maintained during replacement and the system must be bled thoroughly.
Matching
For this model we offer several pumps with different numbers. The number on the label decides, not the model name alone. Car versions differ in, among other things, ESP, brake type and engine. Compare the numbers with your pump or with the vehicle documents.
Symptoms of a faulty ABS pump
- the ABS warning light goes out and comes on by itself,
- the wheels lock under hard braking,
- the tester shows a control module or valve fault,
- traction control switches off.
Start by checking the fuse and connectors; replace the pump only when the wiring and sensors are in working order.
Questions and answers
| What does “used, working” mean? |
|---|
| We sell it as a used part, in working order and in good condition; this information is also given in the listing features. |
| Do the brakes need bleeding after replacement? |
| Yes, once the brake system has been opened it must be bled. In many cars this is done with a diagnostic tool that activates the ABS valves. |
| What should I check on delivery? |
| Check that the numbers match the description and that the connector, ports and housing show no cracks or signs of corrosion. |
Not sure? Write to contact@auto24parts.com and we will help you choose the right ABS pump for your car.
