A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump and control module Opel Mokka 9857530580 10091739183
Vendors's code: 9857530580
Product code: 10091739183
Barcode:
Code 39:
ISBN:
1 300,81 zł
Price
1 300,81 zł
1 600,00 zł
Price
1 600,00 zł
Ask about the product
ABS pump and control module Opel Mokka 9857530580 10091739183
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
120,00 zł
-
shipping
(Poland)
from
120,00 zł
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
How do you check whether the ABS pump will fit the Opel Mokka?
This is a used, working ABS pump with control module for the Opel Mokka - numbers 9857530580; 10091739183. Before buying, compare the numbers with the label on the module in your car.
ABS pump and control module Opel Mokka
An ABS pump with electronics helps you keep control of the car during hard braking. The unit offered applies to: Opel Mokka; it is used, working and in good condition.
Numbers to compare
- 9857530580 - part number (OEM)
- 10091739183 - ABS control module number (ATE)
Application according to the listing
- Opel Mokka - model
- ATE - manufacturer
How an ABS pump with control module works
The module electronics store fault codes that can be read with a diagnostic tool. This makes it easier to determine whether the sensors, the wiring or the hydraulic unit itself is to blame.
Matching
The module carries two numbers: 9857530580 is the part number and 10091739183 is the control module number. Compare both with the label on the pump in your Mokka.
Symptoms of a faulty ABS pump
- the ABS warning light goes out and comes on by itself,
- the wheels lock under hard braking,
- the tester shows a control module or valve fault,
- traction control switches off.
Remember that after replacement the module may need coding or adaptation - check this for your model.
Questions and answers
| Do you also sell ABS sensors or connectors? |
|---|
| This listing covers only the pump with control module. You will find additional parts in the other categories of the shop, or ask us about availability. |
| Is the control module included? |
| Yes, the listing covers the ABS pump together with the control module, as stated in the name. If you want to confirm the details of the set, write to us before buying. |
| Can I fit a pump from a different equipment version? |
| We do not assume so. Modules differ in functions (ABS, ESP, ASR) and software, so compare the numbers and the version of your car. |
Send a photo of your ABS pump or its number to contact@auto24parts.com and we will confirm whether this part will fit.
