A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump and control module Opel Tigra B Meriva Corsa 13276464AG 0265234694
Vendors's code: 13276464AG
Product code: 0265950954
Barcode:
Code 39:
ISBN:
$145.56
Price
$145.56
$179.03
Price
$179.03
In stock
Ask about the product
ABS pump and control module Opel Tigra B Meriva Corsa 13276464AG 0265234694
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
$30.69
-
shipping
(Poland)
from
$30.69
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Looking for an ABS pump with electronics for the Opel Tigra B Meriva Corsa?
This is a used, working ABS pump with control module for the Opel Tigra B Meriva Corsa - numbers 13276464 AG / 13276464AG; 0 265 234 694 / 0265234694. Before buying, compare the numbers with the label on the module in your car.
ABS pump and control module Opel Tigra B Meriva Corsa
For the Opel Tigra B Meriva Corsa we offer a used ABS pump together with its control module, which you can match by the numbers in the list. It is working and in good condition.
Numbers to compare
- 13276464 AG / 13276464AG - part number (OEM)
- 0 265 234 694 / 0265234694 - ABS pump number (Bosch)
- 0 265 950 954 / 0265950954 - ABS control module number (Bosch)
Application according to the listing
- Opel Tigra B Meriva Corsa - model
- Bosch - manufacturer
How an ABS pump with control module works
The valves in the hydraulic block open and close many times per second, and the control module monitors their operation continuously. A failure of any of these parts turns on the ABS warning light.
Matching
Compare number 13276464 AG in full with the number on your pump. Different versions were fitted to the same models, so the number decides the fit, not the model alone. Car versions differ in, among other things, ESP, brake type and engine. Compare the numbers with your pump or with the vehicle documents.
Symptoms of a faulty ABS pump
- valve fault codes appear,
- the ABS works unevenly,
- the warning light stays on even after a sensor replacement,
- the module stops responding after moisture gets in.
Inspect the control module connector: corrosion or burnt contacts cause symptoms similar to faulty electronics.
Questions and answers
| What does “used, working” mean? |
|---|
| We sell it as a used part, in working order and in good condition; this information is also given in the listing features. |
| Does the control module need coding after the pump is replaced? |
| It depends on the make, model and version. Before buying, check whether your car needs adaptation or coding after the replacement. |
| Do the brakes need bleeding after replacement? |
| Yes, once the brake system has been opened it must be bled. In many cars this is done with a diagnostic tool that activates the ABS valves. |
Not sure? Send a photo of your module to contact@auto24parts.com - we will check it for you.
