A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump and control module Opel Vauxhall Insignia Kombi 13332549 16817014
Vendors's code: 13332549
Product code: E799-28147
Barcode:
Code 39:
ISBN:
Ask about the product
ABS pump and control module Opel Vauxhall Insignia Kombi 13332549 16817014
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
£22.79
-
shipping
(Poland)
from
£22.79
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
ABS pump number 13332549 - is this the right part?
This is a used, working ABS pump with control module for the Opel Vauxhall Insignia Kombi - numbers 13332549; 16817014. Before buying, compare the numbers with the label on the module in your car.
ABS pump and control module Opel Vauxhall Insignia Kombi
In the Opel Vauxhall Insignia Kombi (2008-2010), the hydraulic unit with control module decides when and how much to reduce the pressure in the brakes of individual wheels. We sell a used, working unit in good condition.
Numbers to compare
- 13332549 - part number (OEM)
- 16817014 - part number (OEM)
- 16312214-P - part number (OEM)
- 54085571B - part number (OEM)
Application according to the listing
- Opel Vauxhall Insignia Kombi - model
- 2008-2010 - year
How an ABS pump with control module works
The module is connected by brake lines to the master cylinder and to the wheel circuits. That is why cleanliness must be maintained during replacement and the system must be bled thoroughly.
Matching
Compare number 13332549 in full with the number on your pump. Different versions were fitted to the same models, so the number decides the fit, not the model and year alone. Modules differ, among other things, in the layout of the brake line ports and the connector. Always compare the numbers and the appearance of your pump with the unit in the listing.
Symptoms of a faulty ABS pump
- the ABS warning light comes on once the car has warmed up,
- the brake pedal vibrates for no reason,
- no communication with the module over the CAN bus,
- the system switches to emergency mode.
The brake system is crucial for safety - after replacement, bleed the brakes and have the ABS checked in a workshop.
Questions and answers
| What condition is this part in? |
|---|
| It is a used, working part in good condition. Please send any questions about its condition to us before buying. |
| Where does this part come from? |
| The pump is used and comes from a dismantled vehicle. We give the manufacturer and OEM numbers in the description so that you can compare them. |
| Which number matters most when choosing? |
| It is best to compare all the numbers on the module, above all the one marked as the manufacturer or OEM number. |
Send questions about compatibility to contact@auto24parts.com - state the model, year and the number from the module.
