A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump and control module Opel Vectra B 90576559 0265220457
Vendors's code: 90576559
Product code: 0273004231
Barcode:
Code 39:
ISBN:
650,41 zł
Price
650,41 zł
800,00 zł
Price
800,00 zł
Ask about the product
ABS pump and control module Opel Vectra B 90576559 0265220457
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
120,00 zł
-
shipping
(Poland)
from
120,00 zł
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
How do you check whether the ABS pump will fit the Opel Vectra B?
This is a used, working ABS pump with control module for the Opel Vectra B - numbers 90 576 559 / 90576559; 0 265 220 457 / 0265220457. Before buying, compare the numbers with the label on the module in your car.
ABS pump and control module Opel Vectra B
When the ABS in the Opel Vectra B stops working, the pump module with its control unit is often to blame. We offer a used, working unit in good condition.
Numbers to compare
- 90 576 559 / 90576559 - part number (OEM)
- 0 265 220 457 / 0265220457 - ABS pump number (Bosch)
- 0 273 004 231 / 0273004231 - ABS control module number (Bosch)
Application according to the listing
- Opel Vectra B - model
- Bosch - manufacturer
How an ABS pump with control module works
The module is connected by brake lines to the master cylinder and to the wheel circuits. That is why cleanliness must be maintained during replacement and the system must be bled thoroughly.
Matching
We also offer other pumps for this model with different numbers. Choose by the number on the module, not by the model alone. Car versions differ in, among other things, ESP, brake type and engine. Compare the numbers with your pump or with the vehicle documents.
Symptoms of a faulty ABS pump
- the ABS and brake warning lights do not go out after switching on the ignition,
- no wheel speed reading,
- the car reports sensor faults even though the sensors work,
- the module overheats or resets.
Inspect the control module connector: corrosion or burnt contacts cause symptoms similar to faulty electronics.
Questions and answers
| What condition is this part in? |
|---|
| It is a used, working part in good condition. Please send any questions about its condition to us before buying. |
| Can I fit a pump from a different equipment version? |
| We do not assume so. Modules differ in functions (ABS, ESP, ASR) and software, so compare the numbers and the version of your car. |
| What should I check on delivery? |
| Check that the numbers match the description and that the connector, ports and housing show no cracks or signs of corrosion. |
If you have questions about the application, write to contact@auto24parts.com and give the number from the label.
