A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump and control module Opel Vectra C Signum 09191495 13664101
Vendors's code: 09191495
Product code: 54084673C
Barcode:
Code 39:
ISBN:
$83.17
Price
$83.17
$102.30
Price
$102.30
Ask about the product
ABS pump and control module Opel Vectra C Signum 09191495 13664101
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
$30.69
-
shipping
(Poland)
from
$30.69
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
How do you check whether the ABS pump will fit the Opel Vectra C Signum?
This is a used, working ABS pump with control module for the Opel Vectra C Signum - numbers 09191495; 13664101. Before buying, compare the numbers with the label on the module in your car.
ABS pump and control module Opel Vectra C Signum
The set in this listing (ABS pump and control module) runs the anti-lock braking system in: Opel Vectra C Signum (2002-2005). Match it by the numbers in the list. It is used, working and in good condition.
Numbers to compare
- 09191495 - part number (OEM)
- 13664101 - part number (OEM)
- 13509001 - part number (OEM)
- 54084673C - part number (OEM)
Application according to the listing
- Opel Vectra C Signum - model
- 2002-2005 - year
How an ABS pump with control module works
The valves in the hydraulic block open and close many times per second, and the control module monitors their operation continuously. A failure of any of these parts turns on the ABS warning light.
Matching
For this model we offer several pumps with different numbers. The number on the label decides, not the model name alone. The brake system is critical for safety, so fitting is best left to a workshop that will bleed the brakes and check ABS operation.
Symptoms of a faulty ABS pump
- an ABS fault appears after replacing the battery,
- the voltage at the module is unstable,
- the brake and ABS warning lights come on together,
- the brakes work, but without ABS assistance.
Before buying, make sure the cause is not the power supply or the wiring loom, and only then replace the module.
Questions and answers
| What condition is this part in? |
|---|
| It is a used, working part in good condition. Please send any questions about its condition to us before buying. |
| Can I fit a pump from a different equipment version? |
| We do not assume so. Modules differ in functions (ABS, ESP, ASR) and software, so compare the numbers and the version of your car. |
| Why is the number written in several ways? |
| The same number may be written with spaces, hyphens or as one string. We give both forms to make it easier to find. |
Write to contact@auto24parts.com with the model, year and the number from your pump - we will check the fit.
