A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump and control module Peugeot 306 Citroen Xsara 6N 9625242180 0265216457
Vendors's code: 9625242180
Product code: 1A9B-94122
Barcode:
Code 39:
ISBN:
Ask about the product
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
ABS pump number 9625242180 - is this the right part?
This is a used, working ABS pump with control module for the Peugeot 306 Citroen Xsara 6N - numbers 96 252 421 80 / 9625242180; 0 265 216 457 / 0265216457. Before buying, compare the numbers with the label on the module in your car.
ABS pump and control module Peugeot 306 Citroen Xsara 6N
An ABS pump with control module is one of the key active safety components. This listing applies to: Peugeot 306 Citroen Xsara 6N (1997-2004); the part is used, working and in good condition.
Numbers to compare
- 96 252 421 80 / 9625242180 - part number (OEM)
- 0 265 216 457 / 0265216457 - ABS pump number (Bosch)
- 0 273 004 173 / 0273004173 - ABS control module number (Bosch)
Application according to the listing
- Peugeot 306 Citroen Xsara 6N - model
- 1997-2004 - year
- Bosch - manufacturer
How an ABS pump with control module works
ABS does not shorten the braking distance in all conditions, but it lets you steer the car under hard braking. The pump with control module is the heart of this mechanism.
Matching
Compare number 96 252 421 80 in full with the number on your pump. Different versions were fitted to the same models, so the number decides the fit, not the model and year alone. The electronics and the hydraulic block are matched to each other, so we treat the listing as a set that should be compared with the original by its numbers.
Symptoms of a faulty ABS pump
- the ABS warning light comes on once the car has warmed up,
- the brake pedal vibrates for no reason,
- no communication with the module over the CAN bus,
- the system switches to emergency mode.
Remember that after replacement the module may need coding or adaptation - check this for your model.
Questions and answers
| What condition is this part in? |
|---|
| It is a used, working part in good condition. Please send any questions about its condition to us before buying. |
| Can I drive with the ABS warning light on? |
| Usually the car still brakes without ABS assistance, but the wheels can lock and ESP will not work. The repair should be done as soon as possible. |
| Where does this part come from? |
| The pump is used and comes from a dismantled vehicle. We give the manufacturer and OEM numbers in the description so that you can compare them. |
Not sure? Write to contact@auto24parts.com and we will help you choose the right ABS pump for your car.