A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump and control module Peugeot 406 9630532980 0265218543
Vendors's code: 9630532980
Product code: D5F9-716ED
Barcode:
Code 39:
ISBN:
260,16 zł
Price
260,16 zł
320,00 zł
Price
320,00 zł
In stock
Ask about the product
ABS pump and control module Peugeot 406 9630532980 0265218543
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
120,00 zł
-
shipping
(Poland)
from
120,00 zł
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
ABS pump for the Peugeot 406 - what to check before buying?
This is a used, working ABS pump with control module for the Peugeot 406 - numbers 96 305 329 80 / 9630532980; 0 265 218 543 / 0265218543. Before buying, compare the numbers with the label on the module in your car.
ABS pump and control module Peugeot 406
When the ABS in the Peugeot 406 (1999-2010) stops working, the pump module with its control unit is often to blame. We offer a used, working unit in good condition.
Numbers to compare
- 96 305 329 80 / 9630532980 - part number (OEM)
- 0 265 218 543 / 0265218543 - ABS pump number (Bosch)
- 0 273 004 270 / 0273004270 - ABS control module number (Bosch)
Application according to the listing
- Peugeot 406 - model
- 1999-2010 - year
- Bosch - manufacturer
How an ABS pump with control module works
The module is connected by brake lines to the master cylinder and to the wheel circuits. That is why cleanliness must be maintained during replacement and the system must be bled thoroughly.
Matching
The number 96 305 329 80 also appears in another listing. Compare all the numbers with the label on your pump - we do not assume that listings are interchangeable. The brake system is critical for safety, so fitting is best left to a workshop that will bleed the brakes and check ABS operation.
Symptoms of a faulty ABS pump
- ABS does not react to wheel slip,
- ESP or ASR does not switch on,
- power supply faults in the diagnostic memory,
- signs of corrosion are visible on the connector.
Start by checking the fuse and connectors; replace the pump only when the wiring and sensors are in working order.
Questions and answers
| What does “used, working” mean? |
|---|
| We sell it as a used part, in working order and in good condition; this information is also given in the listing features. |
| Can a pump with a different number fit as well? |
| Sometimes yes, but we do not assume that listings are interchangeable. Compare all the numbers with the label on your pump or ask us. |
| Can I drive with the ABS warning light on? |
| Usually the car still brakes without ABS assistance, but the wheels can lock and ESP will not work. The repair should be done as soon as possible. |
Send a photo of your ABS pump or its number to contact@auto24parts.com and we will confirm whether this part will fit.
