A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump and control module Peugeot 406 Coupe 9630532980 0265216543
Vendors's code: 9630532980
Product code: 6334-542E4
Barcode:
Code 39:
ISBN:
Ask about the product
ABS pump and control module Peugeot 406 Coupe 9630532980 0265216543
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
£22.75
-
shipping
(Poland)
from
£22.75
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Peugeot 406 Coupe - is this the right ABS pump for your car?
This is a used, working ABS pump with control module for the Peugeot 406 Coupe - numbers 96 305 329 80 / 9630532980; 0 265 216 543 / 0265216543. Before buying, compare the numbers with the label on the module in your car.
ABS pump and control module Peugeot 406 Coupe
This ABS pump with control module is intended for: Peugeot 406 Coupe (2003). It is a used, working part in good technical condition.
Numbers to compare
- 96 305 329 80 / 9630532980 - part number (OEM)
- 0 265 216 543 / 0265216543 - ABS pump number (Bosch)
- 0 273 004 270 / 0273004270 - ABS control module number (Bosch)
Application according to the listing
- Peugeot 406 Coupe - model
- 2003 - year
- Bosch - manufacturer
How an ABS pump with control module works
The module electronics store fault codes that can be read with a diagnostic tool. This makes it easier to determine whether the sensors, the wiring or the hydraulic unit itself is to blame.
Matching
The number 96 305 329 80 also appears in another listing. Compare all the numbers with the label on your pump - we do not assume that listings are interchangeable. This listing covers the set described in the name, i.e. the ABS pump with control module. We will confirm the details of the set on request.
Symptoms of a faulty ABS pump
- valve fault codes appear,
- the ABS works unevenly,
- the warning light stays on even after a sensor replacement,
- the module stops responding after moisture gets in.
Before buying, make sure the cause is not the power supply or the wiring loom, and only then replace the module.
Questions and answers
| What condition is this part in? |
|---|
| It is a used, working part in good condition. Please send any questions about its condition to us before buying. |
| Do the brakes need bleeding after replacement? |
| Yes, once the brake system has been opened it must be bled. In many cars this is done with a diagnostic tool that activates the ABS valves. |
| Why is the number written in several ways? |
| The same number may be written with spaces, hyphens or as one string. We give both forms to make it easier to find. |
If you have questions about the application, write to contact@auto24parts.com and give the number from the label.
