A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump and control module Peugeot 407 S118676001N 15710604
Vendors's code: S118676001N
Product code: 9661731180
Barcode:
Code 39:
ISBN:
$82.28
Price
$82.28
$101.20
Price
$101.20
Ask about the product
ABS pump and control module Peugeot 407 S118676001N 15710604
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
$30.36
-
shipping
(Poland)
from
$30.36
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
How do you check whether the ABS pump will fit the Peugeot 407?
This is a used, working ABS pump with control module for the Peugeot 407 - numbers S118676001N; 15710604. Before buying, compare the numbers with the label on the module in your car.
ABS pump and control module Peugeot 407
This ABS pump with control module is intended for: Peugeot 407. It is a used, working part in good technical condition.
Numbers to compare
- S118676001N - part number (OEM)
- 15710604 - ABS control module number (TRW)
- 15710504-D / 15710504D - ABS control module number (TRW)
- 9661731180 - part number (OEM)
Application according to the listing
- Peugeot 407 - model
How an ABS pump with control module works
The hydraulic unit contains solenoid valves and a return pump motor. When the control module detects a wheel locking, the valves briefly reduce the pressure in its circuit and the pump returns the fluid, so the driver keeps control of the car's path.
Matching
The number 407 S118676001N also appears in another listing. Compare all the numbers with the label on your pump - we do not assume that listings are interchangeable. The same car model may have had several module versions, depending on drive, equipment and year. The numbers in the list help to tell these versions apart.
Symptoms of a faulty ABS pump
- the ABS and brake warning lights do not go out after switching on the ignition,
- no wheel speed reading,
- the car reports sensor faults even though the sensors work,
- the module overheats or resets.
Before buying, make sure the cause is not the power supply or the wiring loom, and only then replace the module.
Questions and answers
| What condition is this part in? |
|---|
| It is a used, working part in good condition. Please send any questions about its condition to us before buying. |
| Does the control module need coding after the pump is replaced? |
| It depends on the make, model and version. Before buying, check whether your car needs adaptation or coding after the replacement. |
| Why is the number written in several ways? |
| The same number may be written with spaces, hyphens or as one string. We give both forms to make it easier to find. |
Not sure? Write to contact@auto24parts.com and we will help you choose the right ABS pump for your car.
Customers Also Viewed
-
Price $60.72Price $49.37
-
Price $101.20Price $82.28
