A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump and control module Peugeot 9649026780 10096011233
Vendors's code: 9649026780
Product code: 10096011233
Barcode:
Code 39:
ISBN:
€162.60
Price
€162.60
€200.00
Price
€200.00
In stock
Ask about the product
ABS pump and control module Peugeot 9649026780 10096011233
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
€30.00
-
shipping
(Poland)
from
€30.00
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Peugeot - is this the right ABS pump for your car?
This is a used, working ABS pump with control module for the Peugeot - numbers 9649026780; 10.0960-1123.3 / 10096011233. Before buying, compare the numbers with the label on the module in your car.
ABS pump and control module Peugeot
This ABS pump with control module is intended for: Peugeot. It is a used, working part in good technical condition.
Numbers to compare
- 9649026780 - part number (OEM)
- 10.0960-1123.3 / 10096011233 - ABS control module number (ATE)
Application according to the listing
- Peugeot - model
- ATE - manufacturer
How an ABS pump with control module works
ABS does not shorten the braking distance in all conditions, but it lets you steer the car under hard braking. The pump with control module is the heart of this mechanism.
Matching
We also offer other pumps for this model with different numbers. Choose by the number on the module, not by the model alone. The electronics and the hydraulic block are matched to each other, so we treat the listing as a set that should be compared with the original by its numbers.
Symptoms of a faulty ABS pump
- the ABS warning light is on,
- ABS stops working during braking,
- the control module does not communicate with the diagnostic tool,
- sometimes the ESP or traction control light comes on as well.
Compare all the numbers with the label on your pump, because the same car model may have had several versions.
Questions and answers
| Is the part new? |
|---|
| The pump is used, but in working order. You will find its condition in the product features. |
| Where does this part come from? |
| The pump is used and comes from a dismantled vehicle. We give the manufacturer and OEM numbers in the description so that you can compare them. |
| What should I check on delivery? |
| Check that the numbers match the description and that the connector, ports and housing show no cracks or signs of corrosion. |
If you have questions about the application, write to contact@auto24parts.com and give the number from the label.
