A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump and control module Peugeot 9663945580 10097011463
Vendors's code: 9663945580
Product code: 10097011463
Barcode:
Code 39:
ISBN:
£123.58
Price
£123.58
£152.00
Price
£152.00
Ask about the product
ABS pump and control module Peugeot 9663945580 10097011463
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
£22.80
-
shipping
(Poland)
from
£22.80
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
How do you check whether the ABS pump will fit the Peugeot?
This is a used, working ABS pump with control module for the Peugeot - numbers 9663945580; 10.0970-1146.3 / 10097011463. Before buying, compare the numbers with the label on the module in your car.
ABS pump and control module Peugeot
An ABS pump with electronics helps you keep control of the car during hard braking. The unit offered applies to: Peugeot; it is used, working and in good condition.
Numbers to compare
- 9663945580 - part number (OEM)
- 10.0970-1146.3 / 10097011463 - ABS control module number (ATE)
Application according to the listing
- Peugeot - model
- ATE - manufacturer
How an ABS pump with control module works
The module is connected by brake lines to the master cylinder and to the wheel circuits. That is why cleanliness must be maintained during replacement and the system must be bled thoroughly.
Matching
We also offer other pumps for this model with different numbers. Choose by the number on the module, not by the model alone. After replacement the module may need coding or adaptation to the car. Check this for your model before ordering the part.
Symptoms of a faulty ABS pump
- the ABS warning light comes on straight after starting the engine,
- the diagnostic tester cannot connect to the module,
- the speedometer shows incorrect readings,
- the system works only intermittently.
Start by checking the fuse and connectors; replace the pump only when the wiring and sensors are in working order.
Questions and answers
| What does “used, working” mean? |
|---|
| We sell it as a used part, in working order and in good condition; this information is also given in the listing features. |
| Does the control module need coding after the pump is replaced? |
| It depends on the make, model and version. Before buying, check whether your car needs adaptation or coding after the replacement. |
| Why is the number written in several ways? |
| The same number may be written with spaces, hyphens or as one string. We give both forms to make it easier to find. |
Not sure? Write to contact@auto24parts.com and we will help you choose the right ABS pump for your car.
