A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump and control module Peugeot 9665345880 10096039213
Vendors's code: 9665345880
Product code: 10096039213
Barcode:
Code 39:
ISBN:
£369.99
Price
£369.99
£455.09
Price
£455.09
In stock
Ask about the product
ABS pump and control module Peugeot 9665345880 10096039213
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
£22.75
-
shipping
(Poland)
from
£22.75
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
ABS pump for the Peugeot - what to check before buying?
This is a used, working ABS pump with control module for the Peugeot - numbers 9665345880; 10096039213 / 10.0960-3921.3. Before buying, compare the numbers with the label on the module in your car.
ABS pump and control module Peugeot
An ABS pump with control module is the hydraulic unit of the brake system combined with a control module that analyses signals from the wheel sensors and controls the pressure in the brake circuits. This listing applies to: Peugeot. The part is used, working and in good condition.
Numbers to compare
- 9665345880 - part number (OEM)
- 10096039213 / 10.0960-3921.3 - part number (OEM)
Application according to the listing
- Peugeot - model
How an ABS pump with control module works
One module contains two parts: the hydraulic block with valves and pump, and the electronics that control them. Both work together within fractions of a second, especially on slippery surfaces.
Matching
For this model we offer several pumps with different numbers. The number on the label decides, not the model name alone. Modules differ, among other things, in the layout of the brake line ports and the connector. Always compare the numbers and the appearance of your pump with the unit in the listing.
Symptoms of a faulty ABS pump
- the ABS warning light comes on straight after starting the engine,
- the diagnostic tester cannot connect to the module,
- the speedometer shows incorrect readings,
- the system works only intermittently.
If the brake system has been opened, it must be bled after fitting, often using a diagnostic tool that controls the ABS valves.
Questions and answers
| What does “used, working” mean? |
|---|
| We sell it as a used part, in working order and in good condition; this information is also given in the listing features. |
| Can a pump with a different number fit as well? |
| Sometimes yes, but we do not assume that listings are interchangeable. Compare all the numbers with the label on your pump or ask us. |
| Is the control module included? |
| Yes, the listing covers the ABS pump together with the control module, as stated in the name. If you want to confirm the details of the set, write to us before buying. |
Write to contact@auto24parts.com with the model, year and the number from your pump - we will check the fit.
