A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump and control module RANGE ROVER 0265254550 GPLA14F447BB 0265956053
Vendors's code: GPLA14F447BB
Product code: 0265956053
Barcode:
Code 39:
ISBN:
1 951,22 zł
Price
1 951,22 zł
2 400,00 zł
Price
2 400,00 zł
Ask about the product
ABS pump and control module RANGE ROVER 0265254550 GPLA14F447BB 0265956053
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
120,00 zł
-
shipping
(Poland)
from
120,00 zł
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Looking for an ABS pump with electronics for the Range Rover?
This is a used, working ABS pump with control module for the Range Rover - numbers GPLA14F447BB / GPLA-14F447-BB; 0265254550 / 0 265 254 550; 0265956053 / 0 265 956 053. Before buying, compare the numbers with the label on the module in your car.
ABS pump and control module Range Rover
Looking for a replacement for a faulty ABS pump for the Range Rover? We offer a used, working unit with electronics in good condition.
Numbers to compare
- GPLA14F447BB / GPLA-14F447-BB - part number (OEM)
- 0265254550 / 0 265 254 550 - ABS pump number (Bosch)
- 0265956053 / 0 265 956 053 - ABS control module number (Bosch)
Application according to the listing
- Range Rover - model
- Bosch - manufacturer
How an ABS pump with control module works
ABS does not shorten the braking distance in all conditions, but it lets you steer the car under hard braking. The pump with control module is the heart of this mechanism.
Matching
GPLA-14F447-BB is the Land Rover number, while Bosch numbers 0265254550 and 0265956053 identify the pump and the control module respectively. Compare the Land Rover number first, then the Bosch numbers to be sure.
Symptoms of a faulty ABS pump
- the ABS warning light is on,
- ABS stops working during braking,
- the control module does not communicate with the diagnostic tool,
- sometimes the ESP or traction control light comes on as well.
The brake system is crucial for safety - after replacement, bleed the brakes and have the ABS checked in a workshop.
Questions and answers
| Does the control module need coding after the pump is replaced? |
|---|
| It depends on the make, model and version. Before buying, check whether your car needs adaptation or coding after the replacement. |
| What should I check on delivery? |
| Check that the numbers match the description and that the connector, ports and housing show no cracks or signs of corrosion. |
| Where can I find the number on the module? |
| You will usually find the numbers on the label or housing of the module, visible after removing it from the car. If you cannot read them, send us a photo. |
Send questions about compatibility to contact@auto24parts.com - state the model, year and the number from the module.
