A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump and control module Renault Clio II Kangoo Thalia Twingo Nissan Kubistar 8200229137 0265800335
Vendors's code: 8200229137
Product code: 0265800335
Barcode:
Code 39:
ISBN:
Ask about the product
ABS pump and control module Renault Clio II Kangoo Thalia Twingo Nissan Kubistar 8200229137 0265800335
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
£22.75
-
shipping
(Poland)
from
£22.75
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Does this ABS pump fit the Renault Clio II Kangoo Thalia Twingo Nissan Kubistar?
This is a used, working ABS pump with control module for the Renault Clio II Kangoo Thalia Twingo Nissan Kubistar - numbers 8200 229 137 / 8200229137; 0 265 231 333 / 0265231333. Before buying, compare the numbers with the label on the module in your car.
ABS pump and control module Renault Clio II Kangoo Thalia Twingo Nissan Kubistar
In the Renault Clio II Kangoo Thalia Twingo Nissan Kubistar (2003-2007), the hydraulic unit with control module decides when and how much to reduce the pressure in the brakes of individual wheels. We sell a used, working unit in good condition.
Numbers to compare
- 8200 229 137 / 8200229137 - part number (OEM)
- 0 265 231 333 / 0265231333 - ABS pump number (Bosch)
- 0 265 800 335 / 0265800335 - ABS control module number (Bosch)
Application according to the listing
- Renault Clio II Kangoo Thalia Twingo Nissan Kubistar - model
- 2003-2007 - year
- Bosch - manufacturer
How an ABS pump with control module works
The control module receives signals from the wheel speed sensors and compares them. When one wheel slows down faster than the others, it controls the valves in the hydraulic block to prevent it from locking.
Matching
The number 8200 229 137 also appears in another listing. Compare all the numbers with the label on your pump - we do not assume that listings are interchangeable. This listing covers the set described in the name, i.e. the ABS pump with control module. We will confirm the details of the set on request.
Symptoms of a faulty ABS pump
- the ABS warning light comes on once the car has warmed up,
- the brake pedal vibrates for no reason,
- no communication with the module over the CAN bus,
- the system switches to emergency mode.
Start by checking the fuse and connectors; replace the pump only when the wiring and sensors are in working order.
Questions and answers
| What does “used, working” mean? |
|---|
| We sell it as a used part, in working order and in good condition; this information is also given in the listing features. |
| What should I check on delivery? |
| Check that the numbers match the description and that the connector, ports and housing show no cracks or signs of corrosion. |
Write to contact@auto24parts.com with the model, year and the number from your pump - we will check the fit.
