A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump and control module Renault Laguna 8200183452C P5CT2AAY2
Vendors's code: 8200183452C
Product code: 10096014203
Barcode:
Code 39:
ISBN:
Ask about the product
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Does the pump with control module 8200183452C fit your car?
This is a used, working ABS pump with control module for the Renault Laguna - numbers 8200 183 452 C / 8200183452C; P5CT2AAY2. Before buying, compare the numbers with the label on the module in your car.
ABS pump and control module Renault Laguna
Looking for a replacement for a faulty ABS pump for the Renault Laguna? We offer a used, working unit with electronics in good condition.
Numbers to compare
- 8200 183 452 C / 8200183452C - part number (OEM)
- P5CT2AAY2 - part number (OEM)
- 10.0206-0062.4 / 10020600624 - ABS pump number (ATE)
- 10.0960-1420.3 / 10096014203 - ABS control module number (ATE)
Application according to the listing
- Renault Laguna - model
- ATE - manufacturer
How an ABS pump with control module works
During normal driving the system is passive and the brakes work conventionally. Only under hard braking does the pump start to pulse, and you can feel vibrations in the brake pedal.
Matching
We also offer other pumps for this model with different numbers. Choose by the number on the module, not by the model alone. The brake system is critical for safety, so fitting is best left to a workshop that will bleed the brakes and check ABS operation.
Symptoms of a faulty ABS pump
- the ABS warning light is on,
- ABS stops working during braking,
- the control module does not communicate with the diagnostic tool,
- sometimes the ESP or traction control light comes on as well.
Check the level and condition of the brake fluid; old or contaminated fluid accelerates wear of the valves in the hydraulic unit.
Questions and answers
| Is the part new? |
|---|
| The pump is used, but in working order. You will find its condition in the product features. |
| What should I check on delivery? |
| Check that the numbers match the description and that the connector, ports and housing show no cracks or signs of corrosion. |
| Does the brake fluid need replacing after the pump is fitted? |
| The system has to be bled after the pump is replaced anyway, so it is a good moment to check the fluid and replace it if it is old. |
If you have questions about the application, write to contact@auto24parts.com and give the number from the label.