A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump and control module Renault Scenic Megane 8200090690 0265225107
Vendors's code: 8200090690
Product code: 0265950046
Barcode:
Code 39:
ISBN:
Ask about the product
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
How do you choose an ABS pump for the Renault Scenic Megane?
This is a used, working ABS pump with control module for the Renault Scenic Megane - numbers 8200090690; 0 265 225 107 / 0265225107. Before buying, compare the numbers with the label on the module in your car.
ABS pump and control module Renault Scenic Megane
An ABS pump with control module is one of the key active safety components. This listing applies to: Renault Scenic Megane; the part is used, working and in good condition.
Numbers to compare
- 8200090690 - part number (OEM)
- 0 265 225 107 / 0265225107 - ABS pump number (Bosch)
- 0265950046 - ABS control module number (Bosch)
Application according to the listing
- Renault Scenic Megane - model
- Bosch - manufacturer
How an ABS pump with control module works
The hydraulic unit contains solenoid valves and a return pump motor. When the control module detects a wheel locking, the valves briefly reduce the pressure in its circuit and the pump returns the fluid, so the driver keeps control of the car's path.
Matching
Compare number 8200090690 in full with the number on your pump. Different versions were fitted to the same models, so the number decides the fit, not the model alone. Module numbers are written with spaces or as one string. We give both forms to make the part easier to find.
Symptoms of a faulty ABS pump
- the ABS and brake warning lights do not go out after switching on the ignition,
- no wheel speed reading,
- the car reports sensor faults even though the sensors work,
- the module overheats or resets.
Compare all the numbers with the label on your pump, because the same car model may have had several versions.
Questions and answers
| Is the part new? |
|---|
| The pump is used, but in working order. You will find its condition in the product features. |
| Does the control module need coding after the pump is replaced? |
| It depends on the make, model and version. Before buying, check whether your car needs adaptation or coding after the replacement. |
| Do you also sell ABS sensors or connectors? |
| This listing covers only the pump with control module. You will find additional parts in the other categories of the shop, or ask us about availability. |
Send questions about compatibility to contact@auto24parts.com - state the model, year and the number from the module.