A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump and control module Skoda Yeti 1K0614517DC 1K0907379BE
Vendors's code: 1K0614517DC
Product code: 10021206564
Barcode:
Code 39:
ISBN:
€284.55
Price
€284.55
€350.00
Price
€350.00
Ask about the product
ABS pump and control module Skoda Yeti 1K0614517DC 1K0907379BE
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
€30.00
-
shipping
(Poland)
from
€30.00
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
ABS pump number 1K0614517DC - is this the right part?
This is a used, working ABS pump with control module for the Skoda Yeti - numbers 1K0614517DC; 1K0907379BE. Before buying, compare the numbers with the label on the module in your car.
ABS pump and control module Skoda Yeti
An ABS pump with control module is the hydraulic unit of the brake system combined with a control module that analyses signals from the wheel sensors and controls the pressure in the brake circuits. This listing applies to: Skoda Yeti. The part is used, working and in good condition.
Numbers to compare
- 1K0614517DC - part number (OEM)
- 1K0907379BE - part number (OEM)
- 10.0212-0656.4 / 10021206564 - ABS pump number (ATE)
Application according to the listing
- Skoda Yeti - model
- ATE - manufacturer
How an ABS pump with control module works
In cars with ESP or traction control, the same module can also build up pressure at a selected wheel to stabilise the vehicle. The range of functions depends on the equipment of the specific car.
Matching
Compare number 1K0614517DC in full with the number on your pump. Different versions were fitted to the same models, so the number decides the fit, not the model alone. The brake system is critical for safety, so fitting is best left to a workshop that will bleed the brakes and check ABS operation.
Symptoms of a faulty ABS pump
- the pump motor does not start,
- an unusual noise can be heard when braking,
- brake fluid leaks from the hydraulic unit,
- the brake pedal is hard or sinks.
Check the level and condition of the brake fluid; old or contaminated fluid accelerates wear of the valves in the hydraulic unit.
Questions and answers
| What condition is this part in? |
|---|
| It is a used, working part in good condition. The condition is also given in the product features. |
| Which number matters most when choosing? |
| It is best to compare all the numbers on the module, above all the one marked as the manufacturer or OEM number. |
| Where can I find the number on the module? |
| You will usually find the numbers on the label or housing of the module, visible after removing it from the car. If you cannot read them, send us a photo. |
If you have questions about the application, write to contact@auto24parts.com and give the number from the label.
Customers Also Viewed
-
Price €350.00Price €284.55
-
Price €350.00Price €284.55
