A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump and control module SsangYong Kyron Actyon Rexton 4891009000 06210203054
Vendors's code: 4891009000
Product code: 06210906593
Barcode:
Code 39:
ISBN:
£92.69
Price
£92.69
£114.00
Price
£114.00
In stock
Ask about the product
ABS pump and control module SsangYong Kyron Actyon Rexton 4891009000 06210203054
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
£22.80
-
shipping
(Poland)
from
£22.80
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
How do you choose an ABS pump for the SsangYong Kyron Actyon Rexton?
This is a used, working ABS pump with control module for the SsangYong Kyron Actyon Rexton - numbers 48910-09000 / 4891009000; 06.2102-0305.4 / 06210203054. Before buying, compare the numbers with the label on the module in your car.
ABS pump and control module SsangYong Kyron Actyon Rexton
An ABS pump with electronics helps you keep control of the car during hard braking. The unit offered applies to: SsangYong Kyron Actyon Rexton; it is used, working and in good condition.
Numbers to compare
- 48910-09000 / 4891009000 - part number (OEM)
- 06.2102-0305.4 / 06210203054 - ABS pump number (ATE)
- 06.2109-0659.3 / 06210906593 - ABS control module number (ATE)
Application according to the listing
- SsangYong Kyron Actyon Rexton - model
- ATE - manufacturer
How an ABS pump with control module works
The module electronics store fault codes that can be read with a diagnostic tool. This makes it easier to determine whether the sensors, the wiring or the hydraulic unit itself is to blame.
Matching
Compare number 48910-09000 in full with the number on your pump. Different versions were fitted to the same models, so the number decides the fit, not the model alone. The fit is decided first of all by the part number, and only then by the model and year, because different modules were used within one model.
Symptoms of a faulty ABS pump
- the ABS warning light comes on once the car has warmed up,
- the brake pedal vibrates for no reason,
- no communication with the module over the CAN bus,
- the system switches to emergency mode.
Remember that after replacement the module may need coding or adaptation - check this for your model.
Questions and answers
| What condition is this part in? |
|---|
| It is a used, working part in good condition. The condition is also given in the product features. |
| Do the brakes need bleeding after replacement? |
| Yes, once the brake system has been opened it must be bled. In many cars this is done with a diagnostic tool that activates the ABS valves. |
| Why is the number written in several ways? |
| The same number may be written with spaces, hyphens or as one string. We give both forms to make it easier to find. |
Send questions about compatibility to contact@auto24parts.com - state the model, year and the number from the module.
